Author Archive: Sales and Support

How to Choose the Right Industrial Material for Your Project

Posted on by

The United States produces around 7.6 billion tons of industrial waste every year. Some of the waste results from choosing the wrong industrial materials for the project. So, what factors should go into selecting a suitable material?

Below, we list the four factors you should consider when choosing manufacturing materials. By the end, you should have a much better idea of how to pick the best tool for the job. This way, you will avoid adding to the waste.

Environment

Consider the physical environment that the finalized project must endure. Are there factors you need to consider that might hamper how well the materials stand up to stresses?

The following are a few examples of the kinds of things that you might need to be aware of:

  • Corrosive liquids
  • Dust or detritus buildup
  • Gases and vapors
  • Inclement weather
  • Temperature extremes

Any of the above might cause wear and tear to the product and need specific material choices to counteract their effects. Some materials will stand up to certain stresses, and some will not react with specific corrosive liquids.

Durability

When debating the materials for manufacturing, you need to consider how much physical pressure the object will incur. This might happen from someone using it, but it is still as valid to consider how people will store it.

If the construction material needs to carry a load, it needs to be made of hardier materials that are not brittle. Should it need specific breakage points, these should break in a way conducive to what the item needs to do.

You must also ensure that any customizations you make to the material will hold. For example, If you plan to create latticework, it should remain strong enough even when formed into such a structure.

Cost and Budget

One of the most important things that will factor into whether you use a specific material or not is how much it costs. Before pulling the trigger on any particular material, you should consider your budget and what you can afford before pulling the trigger on any specific material.

It may be that hardier materials cost more. As such, you or your company should discuss whether you are willing to accept a less superior material due to budgetary constraints.

More on Industrial Materials

With the above information available to you, likely, you can now choose the best industrial materials for a job. First, consult us if you are still trying to find the best way to solve an industrial issue.

We have experts ready to discuss your material requirements and what you need to get a job done. So send us a message to get the best advice on the market.

 

How to Maintain Your Wind Turbine for Longevity

Posted on by

The average lifespan of a wind turbine is around 20 years. However, some wind turbines can last up to 25 years. Others can have lifespans as short as ten years. 

The quality of different wind turbine brands and models is a sizable part of this lifespan difference. Yet, specific actions you take can extend your turbine’s lifespan. Performing proper wind turbine maintenance is one such action. 

How Often Should a Wind Turbine Get Inspected? 

There are two kinds of manual turbine inspection: regular and thorough. Regular inspection should involve visual inspections and perhaps function tests. Both of these actions usually involve only the most crucial turbine components. 

A thorough inspection is more involved. During these inspections, the technicians should examine all components. In addition, a disassembly of specific internal components often takes place during this time. 

Regular inspections should take place first around 360 hours after the initial installation. After that, they should happen semi-annually. More specifically, they should take place every 6 to 7 months. 

A thorough inspection can take place every five years. However, it’s probably best for them to happen with more regularity. 

Remember, though, that proper maintenance schedules vary between turbine types. Windmill-shaped horizontal turbines, for example, require more maintenance. On the other hand, vertical turbines, which look like egg beaters, mostly require less maintenance. 

Which Actions Should Happen During Wind Turbine Maintenance? 

There are also a few actions that technicians can take during their turbine inspection appointments. These include turbine cleaning, lubrication, and other tasks. Beyond that, technicians can tackle issues as they notice them. 

Certain turbine areas need regular cleaning. For example, techs often need to remove debris, like vegetation, from the rotor. They should also remove dust from the nacelles. 

In addition, they should change the oil regularly. The bearings and gearbox also need lubrication to prevent too much wear. 

Beyond that, maintenance mainly involves damage control. If a part, such as the brakes, is damaged, the techs can attempt to fix it. If they can’t, they’ll replace the part. 

What Are the Different Maintenance Strategies? 

There are two types of maintenance strategies for wind turbines—one is predictive maintenance, and the other is preventative maintenance. 

Preventative maintenance involves the steps described above. In addition, technicians inspect and maintain the components of a turbine regularly. 

Predictive maintenance is less hands-on. Instead, it involves a software program connected to the turbine components. This software analyzes the components and predicts when will need maintenance. 

Contact Us to Get High-Quality Wind Turbine Brakes 

In a nutshell, high-quality wind turbine maintenance requires only organization. Maintenance appointments need to be scheduled and performed. A predictive software needs to be installed. 

Unfortunately, despite your efforts, turbine parts can fail. When that happens, check our inventory. We offer a multitude of high-quality aftermarket turbine parts. 

Contact us today for a free price quote at this link.

 

The Different Types of Industrial Braking Systems

Posted on by

Braking systems are a critical part of industrial machinery. Through friction, they stop or slow the movement of mechanisms. Without them, machines would just keep moving even through dangerous situations.

It’s crucial, therefore, that each of your machines has an effective braking system. The best way to ensure this is to give each device the proper braking system. To do this, you’ll need to know the differences between different braking systems. 

Read on to learn more about some of the different industrial braking systems. 

Braking System Types According to Actuation

Actuation refers to how a system is activated or deactivated. For example, a brake system refers to the specific mechanisms that help a brake stop or slow mechanical movement.

There are a few different actuation constructions. This article will detail these further in the list below. 

Mechanical Braking System 

Mechanical brakes utilize manual power to operate. Therefore, an operator cannot use an automatic mechanism to actuate the brakes. Instead, they have to use their own hands or feet for this. 

The force resulting from this isn’t powerful. However, this braking system type is still useful in applications requiring little force. An excellent example of this is the handbrake on a bicycle.  

Hydraulic Braking System 

The actuation of a hydraulic braking system relies on hydraulic fluid. This is usually a mixture of glycerine, alcohol, and additives. The mechanism will transmit pressure through this liquid.

This braking system type is one of the cheapest, most common, and most reliable. Also, passenger vehicle brakes often rely on hydraulic systems. 

Electric Braking System 

Electric braking systems use magnetic force to actuate brakes. However, the magnets within the system are not always drawn to each other. Therefore, an operator must run an electric current through them to activate a magnetic force. 

These systems tend to be expensive but very effective. They also engage quickly. 

The Parts of Braking Systems 

Within the different actuation mechanisms are certain brake types. As a result, various systems may or may not share the same brake models.

The drum brake and disc brake are two of the most well-known. You can learn more about each of these below. 

Disc Brake 

A disc brake is named for the disc-shaped part that is often connected to a wheel. Above the disc is a C-shaped part known as a caliper whose sides extend over the disc.

When an operator applies the brake, a piston on one side of the caliper moves forward. This eventually squeezes the disc against the other side of the caliper. As a result, the disc stops spinning. 

Drum Brake 

All of the mechanisms of a drum brake are inside a cylinder-like house. Like the disc brake, a drum brake also has a piston. However, when activated, this piston pushes C-shaped ‘brake shoes’ against the inner sides of the drum. 

For High-Quality Industrial Brakes and Other Parts, Check Out Our Products

Check out our products when you need to replace a braking system. We’re the leading provider of industrial supplies and equipment. Contact us now for a free price quote. 

 

Different Types of Crane Parts and Their Uses

Posted on by

The crane is a powerful piece of machinery for hoisting and moving materials. It can lift vertically and horizontally, making it useful in various scenarios.

Yet, for the crane to work effectively and safely, it’s essential to understand how a crane is set. This is because the crane parts work together not only to lift and move materials but also to keep the crane securely on the ground, too. 

Read on to learn a little more about the different crane parts and their role in the safe operation of a crane. 

Crane Mast

The crane mast is the part of the crane that acts like a tower lifting the other components into the air, so they have room to work. Therefore, this part is sometimes called a tower. 

The wire to handle the hook and pulley system used by the crane runs up through the tower. 

Climbing Frame

The climbing frame is a section built over the crane mast. It contains many of the components that allow the crane to operate. 

The climbing frame also allows the crane operator to get to the operator’s cab. 

Slewing Unit

The slewing unit is an integral part of the crane for movement. Most people understand that a crane can lift items vertically up and down. 

A crane can also lift and move objects from side to side. It can do this because of the slewing unit.

This part of the crane works to twist the crane, allowing it to turn 360 degrees around. 

Operator’s Cab

The operator’s cab houses all of the controls to operate the crane. The crane operator must go up to the operator’s cab, often high up, sitting on the hoist. 

A crane operator needs to have maximum visibility as they operate the crane. For this reason, the operator’s cab is often quite elevated on the machine. 

Machinery Arm and Jib

You can find the machinery arm on a traditional crane that holds a crane mast. The machinery arm keeps the materials away from the crane for safe movement. 

On a crane with a boom, you’ll often see a jib, similar in function to the machinery arm. The jib is a separate telescoping arm that projects from the crane’s boom, allowing it further reach so the crane doesn’t need to get moved. 

Concrete Counterweight

A crane couldn’t operate without the counterweight. It’s the part of the crane that counteracts the weight being lifted. 

When operating a crane, it’s critical to know the weight you’re lifting, so the appropriate amount of counterweight can be in place. 

This keeps the crane from tipping while it swings and moves heavy loads. 

Hook

The crane also couldn’t operate without a hook or a device like it. The hook gets used to connect the material being lifted with the crane. 

The hook holds onto the lifted material so the crane can move it. 

Know Crane Parts Before Operation

The crane is an essential part of a worksite and warehouse because it can do the heavy lifting to places you might not be able to get other equipment to. Understanding how the crane parts work together will allow you to use the crane effectively. 

If you’re operating a crane and need parts, we can help. Contact us today to discuss all your parts needs. 

A Complete Guide to the Different Types of Clutches

Posted on by

The industrial machinery market in America is currently worth more than $162.9 billion per year. However, if you use this type of machinery in your business, you will already know this doesn’t just include the cost of buying new equipment. 

It can cost a lot to maintain your equipment properly. Preventative maintenance can help reduce these costs. It will also help you pick the best equipment for your industry.

For example, understanding different types of clutches will help you decide which one will do the right job for you. Read on to learn everything you need about different types of industrial clutches.

Industrial-Toothed Clutches 

Industrial-toothed clutches are popular clutch options in a range of industries. 

They feature a lockable stationary coil, and the teeth allow for additional grip. This makes them ideal for use in wet conditions.

Torque-Limiting Clutches 

As the name suggests, torque-limiting clutches are designed to respond to excessive torque loads. You may have heard people refer to these clutches as friction plate slip-clutches.

When there is a spike in torque, the torque-limiting clutch slips, disconnecting the driving shaft from its driven components. As a result, some systems will partially disengage while others disengage entirely.

Different clutches do this using: 

  • Shear pins 
  • Synchronized magnets 
  • Small hardened balls 
  • A pawl and spring release

This helps to protect equipment that the torque overload would otherwise damage.

The Expanding Clutch 

Expanding clutches also respond to the forces around them. However, unlike torque-limiting clutches, they react to speed rather than torque pressure. 

As the engine speed in your equipment increases, so does the centrifugal force. So the wedges in your clutch’s EXP start to exert an outward pressure and expand. As this happens, the clutch engages.

These clutches are also known as centrifugal clutches or centrifugal force clutches. They were initially invented in 1858 when they were used in railway trains.

Electromagnetic Clutches 

Electromagnetic clutches (or electromechanical clutches) are known for working fast and seamlessly. These clutches operate electrically, but they transmit torque in your machinery mechanically. 

The most simplistic type of electromagnetic clutch is the friction-plate clutch. However, you can also get: 

  • Multiple disk clutches 
  • Electromagnetic tooth clutches 
  • Electromagnetic particle clutches 
  • Hysteresis-powered clutches

These clutches engage when they come into contact with the electromagnet. This produces a magnetic field through the clutch and magnetizes the clutch’s rotor. This draws up the armature to the rotor, which creates friction. 

When the current stops flowing through the rotor, the armature turns freely in the shaft. This creates a small air gap between it and the rotor’s surface. This disengages the clutch.

Get Help Looking After Different Types of Clutches 

As you can see, you will find a lot of types of clutches used in industrial machinery. Understanding which one you use will help you perform clutch maintenance and identify clutch problems. 

Are you worried about a clutch in your machinery? Then get in touch today for clutch solutions. We’re happy to help!

7 Common Problems with Industrial Disc Brakes and Their Solutions

Posted on by

Your industry relies on equipment to run properly, safely, and efficiently. So when a significant part begins to break down, it threatens your business’s health and your employees’ safety. This is especially true when we’re talking about brakes.

How do you know if your disc brakes are beginning to fail before they give out ultimately? Save yourself the pain of a broken-down machine by learning the significant signs of beginning brake failure. 

1. A Hot Rotor

Rotors sustain the most damage when they overheat. All cross-drilled rotors dissipate heat. But they also potentially develop stress cracks because of the heat. 

Overheated rotors will end up warping. You’ll know you have a warped rotor when you feel a pulsating action as you engage the brake pedal. In short, your industrial brakes will fail if you do not have your rotor replaced immediately. 

2. Brake Pad Breakdown

Hard braking, like when you stop quickly at high speed or constantly braking on an incline, can overheat your brake pads. This constant heat will glaze your brake pads, so they are now slippery rather than the gritty surface they should be. Glazed brakes cannot adequately grab the rotor and will put out a bad smell. 

If your brakes shudder or vibrate when you brake, have your brake pads checked by a brake maintenance expert. 

3. Seized Caliper Piston

When your disc brakes overheat, the caliper piston will seize. At this point, your brakes will either fail to disengage or fail to engage. If the brakes don’t engage, you won’t have any brakes, and if they fail to disengage, your vehicle will pull to the side and begin to smoke. 

4. Boiling Brake Fluid

Overheating brakes can also cause your brake fluid to boil. Hot brake fluid cannot compress, reducing your brakes’ efficiency. In short, you won’t be able to stop if your brake fluid gets excessively hot. 

Look for the signs of overheating brakes before the brake fluid gets to this point. 

5. Soft Pedal

When the pedal on your industrial vehicle pushes too easily, you have a problem with fluid level and a possible fluid leak. You could also have air in your hydraulic line. A soft pedal also indicates a potential bad wheel bearing, completely unrelated to the brakes. 

Regardless, if you have a soft pedal, contact a mechanic. You may not need new brakes but should check to be sure. 

6. Hard Pedal

When your pedal pushes hard, you could have a problem with the power boost system and engine vacuum. You could also have a seized or stuck brake caliper. If the problem is the brakes, you will also smell a burning smell and feet dragging on one wheel. 

7. Sinking Pedal

If your pedal begins to sink to the floorboard without touching it, you have a problem with a master cylinder. You could have a bad master cylinder or a leak. Regardless, you can’t brake adequately if your pedal is already on the floorboard, so you need to have a brake maintenance expert look at it. 

Check Your Disc Brakes

Your disc brakes are essential in your industrial vehicle. Without them, you put your driver and anyone they come in contact with at risk. 

Do you need brake parts? If so, contact us. Our vast supply of parts in our inventory can help you get your brakes working again. 

The Ultimate Guide to Maintaining Hydraulic Clamps

Posted on by

Operating with hydraulic clamps may be your underlying savior if you regularly work with industrial equipment. The hydraulic clamp has become a must-have in the workplace by offering various advantages, such as a safer workplace and machine-tool efficiency.

These clamps can cut manual labor by almost half and make working feel like a breeze.  So, it’s vital to maintain them properly, or you’ll be stuck with a deficient tool.

Are you curious about how to make your hydraulic clamps last? Do you want to ensure your operations run smoothly in the future? Luckily for you, we have a comprehensive guide to help you learn how to maintain your clamps.

Continue reading to guarantee you don’t ever lose your favorite workplace tool!

Clean, Clean, Clean

It’s vital to ensure all your machine tools are clean, especially your hydraulic clamps. Having rusty machines will sacrifice your workplace’s safety. It also makes your hydraulic clamp work less effectively. 

Clean machines will result in a cleaner, faster, and better work environment. So, try to clean your machines often while also slipping in days where you do a deep cleanse. This will involve separating parts and getting into the nitty-gritty places.

Clamp care seems like a hassle, but you’ll be thankful when your hydraulic clamps work for extended periods!

Have Proper Tube Line Support

It’s easy to forget about your tube line support, but it is one of the most critical systems to maintain. Your hydraulic clamps run on a lubrication system, so keeping up with your tube line clamping is vital. In addition, it will ensure you have proper noise and vibration reduction and adequate tube mounting.

Keep Up With Oil Maintenance 

Hydraulic fluid is the blood of hydraulic machines, so you should know how to filter, clean, and change out the oil when needed. Test your oil for contaminants regularly. Make sure you know how often your oil needs to be changed and filtered.

How Often Should You Keep Up With Hydraulic Clamps Maintenance?

Hydraulic clamp care means regular check-ups to ensure it is performing correctly and safely. Don’t be a workplace with a reactive view of hydraulic clamp maintenance; when things go wrong, you’ll fix it then.

Prevent these issues from occurring in the future by keeping a schedule. As a result, you will save time and effort in the future!

Keep Up With Your Favorite Machine Tool

Learning to maintain your machine tools is a sound investment that pays off in more ways than one.

Are you interested in enhancing your maintenance skills? Then, check out a few tips on how to manage other hydraulic machines on our blog today!

Different Ways to Use Universal Joints

Posted on by

Based on 2021 data, manufacturers contributed $2.71 trillion annually to the United States economy. Manufacturing dramatically impacts the economy, but companies cannot do what’s necessary without the right equipment and parts.

Elements like universal joints are necessary to use and run industrial machinery and heavy equipment effectively. In addition, these can aid in the prevention of downtime and other problems within different industries.

Not sure what their applications are? Keep reading to learn more about the details.

Uses of Universal Joints

Universal joints are used in various machines that have long rotating shafts. Often you can find joints between the rear driveshafts and the transmission.

Some of the typical applications of universal joints include the following:

Universal joints are not limited to the above applications. The universal joint material can impact the quality of use.

Universal Joint Materials

Universal joints are available in thermoplastic body members or steel. Those made of thermoplastic body members have significant advantages, such as:

  • Lightweight
  • Negligible backlash
  • Corrosion-resistant
  • High-speed operation

These are typically used in light industrial applications.

Steel joints have a maximum load-carrying capacity for a given size.

Universal joints can be made from almost any material which helps in their application. Stainless steel and naval brass are common materials as well.

For particular construction usage, ball-jointed universals are also available. These are used in high-speed operation and for carrying large torques.

Types of Universal Joints

Plenty of universal joint options can help with different applications. However, in practice, some universal joints are better than others for specific projects.

For example, variable velocity joints are not feasible in automobiles because the drive shaft stays inclined. However, cross, spider, ring, ball, and trunnion types are all forms of variable velocity joints.

The other types of universal joints include:

  • Single joint
  • Double joint
  • Constant velocity joints

Rzeppa, Bendix Weiss, and Tracta are all joints categorized under constant velocity joints.

The three parts of a universal joint are the spider, the driving yoke, and the driven yoke.

Should You Use Universal Joints?

There are many types of joints, but universal joints are unique. As a result, they have many advantages for users.

Some of the benefits of using universal joints are:

  • Flexible universal coupling
  • Facilitates toque transmission between shafts
  • Cost-effective
  • Simple to assemble and dismantle
  • Permits angular displacements

To ensure toque transmission efficiency is high, it’s important to lubricate the joint properly. In addition, proper maintenance is essential to avoid wear and tear of the joints.

The Bottom Line

Universal joints are couplings or joints that connect rigid rods whose axes are bent to each other. They are commonly used in shafts that complete rotary motion.

Various industries can use universal joints and reap their benefits. For your high-demand industrial applications that require a fix for drive shaft misalignment, choose Kor-Pak.

We are the leading distributor of Ameridrives products and can supply you with their famous industrial couplings. Contact us now for more information.

 

A Beginner’s Guide to the Types of Brakes in Industrial Mining

Posted on by

Braking systems are a necessary piece of equipment whenever you use machinery in your industry. 

The brakes are essential to safety, and in industrial mining, they must overcome the conditions of working on the surface and underground. They must be capable of stopping and holding on slopes and ramps while carrying full loads. 

Because of the increased use of automation in industrial sectors, the braking market is expected to grow, making the quality of control and efficiency in brake systems vital.

Whether for your railcar or another piece of equipment, read on for the beginner’s guide to the types of brakes used in industrial mining equipment. 

Railcar Brakes

Railcar brakes are crucial in the industrial mining industry. There are three main options for railcar braking systems. 

Dynamic Wheel Brakes

Dynamic braking is a consistent form used for railcars. It uses the kinetic energy of the turning wheels, and with the electricity generated, it causes the train to decelerate and stop.

They respond more rapidly than air brakes and reduce wheel wear. It’s a safe and efficient way to make the train slow down and stop. 

Tripper Rail Clamps

This braking application is the type you need if the mining equipment you’re using needs to be locked in place. They are spring-set and hydraulically released so that when you remove the power, the brakes kick in, gripping the rail. 

As well as holding positions, these brakes work for emergency stops and lockdowns. 

Wheel Gripper

This static braking system grips the track and holds it in place. It’s used for purposes such as railcar dumping. 

They’re mounted on the inside or outside of the rails and are either spring-applied or pressure-applied. So even in the event of power failure, the memory circuit will hold. 

Braking Systems

You need a reliable braking system with all the heavy equipment on mining sites. Brakes in the mining industry have to survive harsh conditions and maintain quality performance – reliability is vital. 

Understanding the basics helps you anticipate possible maintenance requirements. 

Drum

A drum brake is a dynamic brake. If you need something cost-efficient, then this is an ideal brake system. Lower torque or less space is when this application comes in. 

When you apply the brake, the shoe in the wheel hub pushes against a drum giving you a safe and compact brake. 

Disc Brakes

Disc brakes are also dynamic brakes, and they’re often considered the best choice of braking systems.

If you have unlimited space and high torque, these are your equipment’s brakes. They have a metal disc in the front wheels, and when you apply the brakes, a hard pad presses on the disc, causing it to slow down. 

Hydraulic

Hydraulic brakes are spring-loaded. Pressure on the brake shoes forces them against the drum and provides adjustable torque. As a result, hydraulic brakes last a long time in harsh environments like mining. 

Industrial Mining Braking Systems

If you would like additional details, contact us.

3 Tips for Choosing an Industrial Braking System

Posted on by

Industrial braking systems are one of the most critical pieces of technology around. In essence, the job of a braking system is to absorb energy and bring whatever it is on to a halt.

Read below for three of the most practical tips for choosing the right industrial braking system to match all your needs.

1. Ensure a Warranty Is Included

Your braking system components are constantly exposed to varied types of pressure. So first, ensure all elements have a factory warranty to protect you from defects. Then, should something go wrong, you could quickly get the part replaced.

2. Get Braking System Parts from a Trusted Brand

With so many brands to choose from today, stick to the tried and tested brands known for braking components and have the backing to support their customers. 

Quality should never be compromised when choosing a brand, as the fallout could be catastrophic.

3. Know What Type of Braking System You Need 

Choosing the correct braking system will be a significant factor in whether it suits your needs or not. The following types of braking systems and tips will help you decide.

Spring Applied Brakes

Spring applied brakes act to decelerate a load in the event of a power failure or however you choose the release mechanism to be disengaged. This type of system is suitable for robotics and automation engineering solutions.

Fail-Safe Brakes

Fail-safe brakes are designed to kick in when there is an immediate power cut. Fail-safe brakes have one purpose, and that is to avoid catastrophic accidents. Such a brake system will be applicable for an elevator. 

Pneumatic Brakes

Pneumatic brakes are one of the older brake systems; they use compressed air to drive a piston and apply force to a braking pad. A straightforward system, you can use pneumatic brakes in almost every braking system.

Electromagnetic Brakes

As the name suggests, electromagnetic brakes use electromagnetic force to cause friction, which asserts the necessary stopping action. Therefore, this system is perfect for avoiding the heat dissipation that friction brakes cause.

Hydraulic Brakes

Hydraulic brakes use compressed brake fluid to generate the required baking force. Hydraulic braking systems are known for being simplistic and very reliable and are the primary type of braking systems in industrial applications. From winches to cranes, hydraulic braking systems should be your number one system to turn to. 

Make the Right Choice Today

Choosing the right braking system doesn’t have to be complicated. The right braking system coupled with a trusted manufacturer will not only keep your machine operator healthy, but your machine will stand the test of time.

Are you looking for the best industrial braking system parts on the market? Not sure where to look? Go to our manufacturer’s page and find the best components available on the market!