The modern era has ushered in a wave of new technology. Much of that technology is targeted squarely at one thing: improving mass production capabilities.
Ever since the Industrial Revolution kicked off back in the 18th century, the engineering design process has been completely overhauled. Nowadays, you must use technology to achieve the best designs possible.
Technology doesn’t make up for lack of skill. Here are some essential tips to improve your capacity as an engineer to design high-quality products.
Identify Success Criteria
Before you fire up your CAD program or start building solutions to any of your engineering problems, there’s one crucial step to know. That step is identifying success criteria. These success criteria should outline what a completed project will look like.
The success criteria should be given to you by the final recipients of the completed project.
You need to have a very clear picture of what function you’re trying to support and what result you’re trying to create before you begin designing.
Outline Constraints
With any engineering project, you will have a set of parameters that you will have to adhere to.
These will be your constraints. Such a limitation could be a limit on the power that the unit you design draws or specific dimensions that it must be able to fit into.
What happens when you don’t know your constraints? You might design a perfectly-functioning unit that can’t be used in the real world. So, when you identify your success criteria, take the extra effort to understand the key constraints you’ll use to guide your design.
Consider Manufacturing Capabilities
During the engineering design process, one has to be aware of the limitations that exist in the manufacturing world. Each piece of industrial equipment that will be used to manufacture your engineering creations has specific restrictions on its outputs.
For instance, a specific piece of equipment may only have a tolerance to the nearest inch. Thus, a design that has to be built precisely to the nearest half-inch could not be appropriately produced using that equipment.
Before you start designing, make sure that you consider the manufacturing limitations. Check the restrictions on the industrial equipment that will be used to produce your design. As a bonus, talk to those who operate the equipment. Operators often can provide a great picture of what designs can and cannot be produced on the equipment they operate.
The Engineering Design Process, Made Simple
There you have it. With these critical tips under your belt, you should have a clearer understanding of how the engineering design process works in the corporate world.
Always remember to identify success criteria and outline constraining parameters before you design the project. Design the project within the limits of the manufacturing equipment you have to work with, and you’ll be good to go.
For more engineering advice, be sure to check out the rest of the articles available to read on our website!