Drum brakes are typically replaced every six months. This makes them a low-maintenance, long-lasting product.
When they begin to suffer wear and tear, they become smaller, and new ones are required. But replacing drum brakes should be made easier when needed. Here, we’ll look at three questions to consider when replacing the brakes so that you can ensure they have great longevity.
Read on to learn more.
Is There Movement in the Drums?
When brake drums between the wheel get wedged in the wheel hub, they will stay in place much easier – they fit nicely onto the hub! But as time passes, rust begins to occur, and the brakes become more prominent, taking up more space.
This can cause the brake drums to catch the hub. To detach them and have new ones fitted, you need to remember the following:
- Loosen the brake adjuster so that more space gets made between the brake drums and shoes
- Two blots can enforce the drum from the hub, while at times, the brake drum components can become scratched
- Hammers can cause the drum to blow, so you need to use them with caution
The right drum brakes manufacturers will ensure that they are sturdy, well-fitted, and ready to withstand pressure. That way, their longevity is expanded.
Are You Using the Right Equipment for the Job?
Many different tools are used for changing brake drums throughout the process. These include those involved in loosening and tightening tension springs, retainers or changing the placement of the adjuster.
Always remember to use the right tools for the work!
Some of the primary and most valuable tools used include:
- Channel-lock pliers
- Needle-nose pliers
- Screwdrivers
They help finish the job quicker and more efficiently when brake you replace drums.
Do You Have the Correct Supplies?
Drum Brakes have spring unlockers that help unloosen the brakes. Cleaners and brushes help remove:
- Dirt and dust
- Oil and grease from the back plate
- The wheel hub for replacement
Other Supplies That Help With Replacement
In addition, the following helps— an anti-seize lubricant used in just a few spots to make rust less likely to occur on the hub.
This makes the drum brakes simpler to remove and the brake shoe components on the back plate. But use only when needed and in small amounts so that fewer impurities remain.
Brake grease gets used to help put the adjuster back in place, reducing any additional dirt or grime.
Replacing Drum Brakes Is Made Easy With Our Solutions Today
When replacing drum brakes, remember the following: take the proper precautions to ensure there’s less movement in the brakes, use specialized tools for the job, and source the right supplies.
It’s time to get on board with one of the best industrial equipment manufacturers. Kor Pak is a drum brakes supplier that can help fulfill all your replacement needs.
Call us now and we’ll help you sort your drum brake placements.