Your U.S. Distributor for Airflex Brakes and Parts
Kor-Pak is a leading U.S. distributor of Airflex clutches, brakes, and replacement parts. We supply complete units, friction material, air tubes, and seal kits for the full Airflex line, with the application engineering to size a brake correctly the first time and 24/7 sourcing when a drawworks or press line is down.
Airflex is now a Danfoss brand; the line moved from Eaton in 2021 with its designs, sizes, and part numbers intact. Kor-Pak supplies current Danfoss Airflex production and supports the Eaton-era installed base, so the nameplate on your equipment makes no difference to us.
Call 888-256-7725 for pricing, availability, or sizing help.
Air-Cooled Disc Clutches and Brakes
Spring-applied, air- or hydraulically-released disc brakes for high-cycle and high-inertia stopping.
Floating Housing Brakes
Rated past 430,000 lb-in of torque, with a patented floating housing in place of a floating rotor. Mounting designs fit the common industrial motor frames.
DBA Disc Brakes
The high-cycle workhorse for draglines, power shovels, and conveyors, with static torque to 386,630 lb-in across sizes 117DBA through 329DBA. Single-disc units need no wear adjustment at all.
DBB Disc Brakes
Static torque to 2,535,750 lb-in for cyclic duty on shovels, presses, and bottling lines. Optional split friction discs let you change linings on a mid-shaft brake without tearing into the rest of the drive.
DBBS Disc Brakes
The balanced version of the DBB for drives that are sensitive to rotating mass, with static torque capacities to 5,578,000 lb-in.
DC Clutches and Brakes
The same torque in a smaller package, up to 2,061,000 lb-in. Common on power presses, tension stands, and emergency stop duty, with self-lubricating PolyPak seals.
Browse Air-Cooled Airflex Clutches and Brakes
Water-Cooled Brakes
When the energy load would cook a dry brake, Airflex water-cooled units absorb and dissipate it. All major series carry ABS/CDS approval and ATEX certification.
Water-Cooled Third Generation (WCB3)
The highest thermal rating in its class at 1,000 HP per disc. Self-supporting, with improved coolant flow, and it retrofits to existing WC brake mountings.
WCS Brakes
Externally cooled brakes with thermal capacities to 2,600 HP and a 1:1 dynamic-to-static torque ratio. A standard on drilling rigs, logging equipment, and mooring systems.
WCB2 and WCBD Brakes
The severe-duty series, with thermal capacities to 5,200 HP and torque to 7,254,450 lb-in. The friction material runs against a copper alloy surface that virtually eliminates stick-slip, in open- or closed-loop cooling circuits.
WCSB Tensioning Brakes
Dynamic tensioning, static holding, and emergency stopping in one unit, with thermal capacities to 3,900 HP. Purpose-built for drawworks, mooring systems, and log yarders.
Airflex Clutches and Couplings
The Airflex line runs well beyond disc brakes. Kor-Pak supplies the pneumatic clutch and coupling families that built the brand’s reputation on drawworks, grinding mills, and metal forming lines:
- Expanding Clutches and Brakes
- Constricting Clutches and Brakes, including CB and VC drum styles
- Torque Limiting Couplings
- Combination Clutch and Brake Packages
Airflex Parts and Support from Kor-Pak
Most Airflex calls are parts calls, and we stock accordingly:
- Friction materials for expanding and constricting brakes
- Friction discs, wear plates, and linings for disc and water-cooled units
- Air tubes, actuating bladders, and seal kits
- Cross-referencing of Eaton-era part numbers to current Danfoss production
- Rebuilds and 24/7 emergency sourcing
If a unit is obsolete, we will identify the current equivalent or engineer a replacement.
Ready for a quote? Send us the model and size from the nameplate and we’ll take it from there.