Planox® friction clutches are used within the entire field of mechanical and plant engineering. Our more than 60 years of experience are a guarantee for a technically sophisticated product that meets all modern industrial requirements. Planox® clutches can be actuated mechanically, pneumatically or hydraulically and cover a torque range of 100 to 1,000,000 Nm.

Read more: DESCH Planox® friction clutches

The Conax® friction clutch is based on the design principle of the cone clutch and is therefore self-centering with a high rate of heat resistance. The exhaustive Conax® range provides both mechanically actuated clutches as well as safety slipping clutches in the torque range of 100 to 5,000 Nm or 50 to 24,000 Nm.

Read more: DESCH Conax® friction clutches

The Conax® friction clutch is based on the design principle of the cone clutch and is therefore self-centering with a high rate of heat resistance. The exhaustive Conax® range provides both mechanically actuated clutches as well as safety slipping clutches in the torque range of 100 to 5,000 Nm or 50 to 24,000 Nm.

Read more: DESCH Centrex® centrifugal clutches

DESCHcontrol.S: smooth control for optimum performance

DESCHcontrol.S is the innovative system solution for the synchronization of heavy drives.
Clutch couplings are normally used in the drive train of building machines such as impact crushers, jaw breakers, shredders, etc. Because of the large rotor masses to be accelerated, the starting procedure of these machines is always a challenge to the diesel engine and the clutch.

Developed for the hydraulically-actuated DESCH Planox® clutch PHA series, the DESCHcontrol.S system controller ensures that the starting procedure remains exceedingly smooth. The favourable level of efficiency of the diesel direct drive together with the DESCHcontrol.S represents a significantly better energy balance when compared to alternative drive solutions.