Cutler Hammer Crane Controls

Kor-Pak is a suppler for OEM, Aftermarket, and Surplus/Remanufactured Cutler Hammer Crane Controls.

Description

Cutler Hammer Crane Controls

Cutler Hammer DC Contactors

Kor-Pak Provides a complete line of Cutler Hammer DC Contactors

Cutler Hammer GH505 DC Magnetic Brakes

Kor-Pak provides Cutler Hammer GH505 DC Magnetic Shoe Brakes, as well as spare parts, coils, and AC Solenoid Brakes.  Several surplus brakes available, completely remanufactured and guaranteed with DC Magnetic Shunt or Series Wound Coils, as well as rectifier operated brakes.

Cutler Hammer Brake Wheels

Kor-Pak can provide OEM and Aftermarket brake wheels for Cutler Hammer Shoe Brakes, rough stock bore or bored and keyed to the required dimensions per AISE Mill Motor Standards.

Cutler Hammer Inventory

See below for a list of overstock items, and more can be found on other product pages of the Kor-Pak Website.

Part No Description
-91 Cutler Hammer Felt on a 505 8 inch DC Magnetic Brake, Item 21
-2044 Cutler-Hammer Lock Spring on a No 505 DC Magnetic Brake, Item 33
10” CH 505 Sh Cutler-Hammer Brake Shoe with Lining, 10 Inc DC
10-1510-4 Cutler-Hammer Micro Switch for DC Brake 511 (1LB) 3/9
1025-IH31A Ametek Gemco Foot and Palm Operated Switch. Type D with a Large Orange Mushroom Button 5 Inches in Diameter which is well suited for critical applications where a large easy to see operator is required. NEMA Type 1 Enclosure has a die cast aluminum case and operating button. One D.P.D.T. Switch (2 NO – 2 NC) Case has a Qty. of 2, 3/4 inch pipe tapped conduit entrances one of which is fitted with a pipe plug (4LBS) 1/09
10250T1 Cutler-Hammer 6/13
10250T10 Cutler-Hammer Contact Block Assembly 6/13
10250T1311 Cutler-Hammer 3/13
10250T472 Cutler-Hammer Button Plastic
11-Aug
1025TC13 Cutler-Hammer Lens, Red Oiltight Pretest Lens, OBSOLETE 6/12
10315H50 Cutler Hammer Switch. Rotating Shaft Limit Switch, Type ”J” 10316H50
103 = 103 to 1 Shaft to Cam Ratio
NEMA 1 Enclosure
Qty. 2, Indepenent, Presision Snap Action Switches with Normally Open Contacts # 17-1403
Maximum Switch Setting @ 100 Turns
Minimum Switch Setting @ 1/2 Turn
1/20 of a turn accuracy
103 turns and switch resets
1/8 turn in reverse to reset switch after tripping
1/2 Inch Diameter Shaft Extends 1.5 Inches from the enclosure
Woodruff Key & Keyway 0.125 x 0.50
Approvals UL Listed / CSA Certified
(6LBS)
10316H-155-1 Ametek Gemco Geared Rotary Limit Switch
2006-402-L-120-A
2006 = Type ”K” Rotary Limit Switch
4 = NEMA 4 Rated Watertight Die Cast Enclosure
02 = 2 Independent Circuits / Switches / Cams
L = Left Hand Shaft Extension from the Enclosure. 1/2 Dia. x 1 & 1/2 Inch Extension with # 3 Woodruff Key & Keyway
120 = 120 to 1 Gear Ratio. Cam Block turns once every 120 turns of the main shaft
A = Single Pole Double Throw Switches. Can be wired for either normally open or closed circuits. 4 Screw Terminals per Switch 1950-1-B-A-DO
1 & 1/2 Turns required to reset the switch
Maximum switch setting at 108 turns, minimum at 3 turn
C-H 10316H-155-1
(4LBS)
10316H-157-1 Cutler-Hammer Gemco Geared Rotary Limit Switch
See Gemco 2006-402-L-40-A
2006 = Type ”K” Rotary Limit Switch
4 = NEMA 4 Rated Die Cast Enclosure, Watertight
02 = 2 Independent Circuits / Switches / Cams
L = Left Hand Shaft Extension from the Enclosure. 1/2 Dia. x 1 & 1/2 Inch Extension with Woodruff Keyway & # 404 Woodruff Key
40 = 40 to 1 Gear Ratio. Cam Block turns once every 40 turns of the main shaft
A = Single Pole Double Throw Snap Action Switches. Can be wired for either normally open or closed circuits. 4 Screw Terminals per Switch # 1950-1-B-A-DO
1/2 Turns required to reset the switch
Maximum switch setting at 35 turns, minimum at 1 turn (4LBS)
10316H-158-1 Cutler-Hammer Gemco Geared Rotary Limit Switch
10316H-158-1
Type ”K” Rotary Limit Switch
NEMA 4 Rated Die Cast Enclosure, Watertight
4 Independent Circuits / Switches / Cams
Left Hand Shaft Extension from the Enclosure. 1/2 Dia. x 1 & 1/2 Inch Extension with Woodruff Keyway & # 404 Woodruff Key
120 to 1 Gear Ratio. Cam Block turns once every 120 turns of the main shaft
Single Pole Double Throw Snap Action Switches. Can be wired for either normally open or closed circuits. 4 Screw Terminals per Switch # 1950-1-B-A-DO
1 & 1/2 Turns required to reset the switch
Maximum switch setting at 108 turns, minimum 3 turns (6LBS)
10316H179-1 Cutler-Hammer Limit Switch
10316H179-1
Type ”K” Rotary Limit Switch
NEMA 4 Rated Die Cast Enclosure, Watertight
2 Independent Circuits / Switches / Cams
Right Hand Shaft Extension from the Enclosure. 1/2 Dia. x 1 & 1/2 Inch Extension with Woodruff Keyway & # 404 Woodruff Key
120 to 1 Gear Ratio. Cam Block turns once every 120 turns of the main shaft
Single Pole Double Throw Snap Action Switches. Can be wired for either normally open or closed circuits. 4 Screw Terminals per Switch # 1950-1-B-A-DO
1/2 Turns required to reset the switch
Maximum switch setting at 108 turns, minimum at 3 turns
(4LBS)
10316H2000 Cutler Hammer Switch. OBSOLETE Snap Switch. DPDT See AME-1950-4-B-A-DO (<1LB) 7/10
10316H4557A Cutler-Hammer Geared Rotary Limit Switch
2006-402-L-30-A
2006 = Type ”K” Rotary Limit Switch
4 = NEMA 4 Rated Die Cast Enclosure, Watertight
02 = 2 Independent Circuits / Switches / Cams
L = Left Hand Shaft Extension from the Enclosure. 1/2 Dia. x 1 & 1/2 Inch Extension with Woodruff Keyway & # 404 Woodruff Key
30 = 30 to 1 Gear Ratio. Cam Block turns once every 30 turns of the main shaft
A = Single Pole Double Throw Snap Action Switches. Can be wired for either normally open or closed circuits. 4 Screw Terminals per Switch # 1950-1-B-A-DO
3/8 Shaft Turn required to reset the switch
Maximum switch setting at 26 turns, minimum at 1 turn
2006-402-L-30-A
(4LBS)
10316H4559 Cutler-Hammer Geared Rotary Limit Switch
2006-402-L-80-A
2006 = Type ”K” Rotary Limit Switch
4 = NEMA 4 Rated Watertight Die Cast Enclosure
02 = 2 Independent Circuits / Switches / Cams
L = Left Hand Shaft Extension from the Enclosure. 1/2 Dia. x 1 & 1/2 Inch Extension with # 3 Woodruff Key & Keyway
80 = 80 to 1 Gear Ratio. Cam Block turns once every 80 turns of the main shaft
A = Single Pole Double Throw Switches. Can be wired for either normally open or closed circuits. 4 Screw Terminals per Switch # 1950-1-B-A-DO
1 Turn required to reset the switch
Maximum switch setting at 72 turns, minimum at 2 & 1/2 turns
AME-2006-402-L-80-A
(4LBS)
10316H89A Cutler Hammer Switch. OBSOLETE Snap Switch see AME-1950-1-B-A -DO (<1LB) 1/11
10370H246 Cutler-Hammer Solenoid Assembly 6/7
10370H357 Cutler-Hammer Solenoid. General Purpose Push Pull Solenoid with a 220 Volt Coil, Size ”D”. 5.5 Inch Type ”S” Brake? 8/11
10370H358 Cutler-Hammer Coil 9/13
10370H369 Cutler- Hammer Coil 8/11
10923H19A Cutler-Hammer Contactor Part 5/12
10923H2A Cutler-Hammer Interlock, 2 N.O., formed Lever 4/12
10923H3 Cutler-Hammer Interlock. Electrical Interlock, 1 N.O. – 1 N.C. Formed Lever 7/12
11-1746 Cutler Hammer Screw. Adjusting Screw Assembly on a No 505 8 Inch DC Magnetic Brake, Item 14
11-1746-2 Cutler-Hammer Adjustment Assembly on a 505 10 inch DC Magnetic Brake, Item 14
11-1746-4 Cutler-Hammer Screw. Adjusting Screw Assembly on a No 505 16 Inch DC Brake, Item 14, 1 per brake
11-1788 Cutler Hammer Cap Screw on a No 505 DC Magnetic Brake, Item 32
11-2051-2 Cutler-Hammer Screw 9/8
11-3046-3 Cutler-Hammer Self-Lock Screw for the Brake Shoe Clamp on a GH505 19 Inch Brake Assembly. Item 33. Qty. 1, 4 required per brake. 1/2 -13 X 2.00 Self Lock Screw
11-4625-2 Cutler-Hammer Adjustment Wedge on a 10 Inch 505 Series Brake. Item 8
11-4625-3 Cutler-Hammer Adjusting Screw Assembly on a 505 Series Brake 4/8
11-4625-4 Cuter-Hammer Screw, Adjustment Screw Assembly on a No 505 16 Inch DC Brake. Item 14, 1 per brake 10/13
11-4625-6 Cutler-Hammer Adjusting Screw on a Series 505 23 Inch DC Brake, item 13, Pub 11381
Nov-40 Cutler-Hammer Screw. Self-Locking Screw on a No 505 16 Inch DC Brake. Item 18
11-4675-3 Cutler-Hammer Adjusting Screw Old 11-1746-3
11-723-15 Cutler-Hammer Bolt. Hex Bolt 10 Inch Series 505 DC Brake, 1/2 -13 x 4.5”, Item 7
13-1089-12 Cutler-Hammer Pin for C-H Type S Brake
13-1145-13 Cutler-Hammer Plunger Pin Assembly on a S511 Solenoid Brake 8/11
13-317-9 Cutler-Hammer Pin on a Bull 511 Type ”S” 5 & 1/2 Inch Brake. Item # 12, 1 per brake (<1LB)
13-3186 Cutler-Hammer Link Pin Spring Pin for the Plunger on a Bulletin 511 Type S 4 Inch Brake 10, 15 or 20 FT LB. Item 2, 2 per brake. 3/32nd Dia Roll Pin x .562
13-3186-5 Cutler-Hammer Spring Pin Guard on a No 505 8 Inch DC Magnetic Brake, Item 13
13-3186-7 Cutler-Hammer Spring Pin for a 8, 10 or 13 Inch No 505 Brake, Item 4 9/13
13-3187-2 Cutler-Hammer Pin. Spring Pin on a Bull 511 Type ”S” 5 & 1/2 Inch Brake. Item # 11, 4 per brake (<1LB) 9/13
13-3527 Cutler-Hammer Pin 9/13
13-3863 Cutler-Hammer Pin, Link Pin item 7 on a Bulletin 511 Type ”S” 4 Inch Brake. 1 per brake 8/11
13-3864 Cutler-Hammer Pin. Link Pin Assembly on a 4 Inch Series 511 Brake. Pin with cotter pin holes and 2 neoprene sleeves 916-120, item 24 PUB 12487 7/12
13-3864-2 Cutler-Hammer Pin. Link Pin Assembly on a 4 Inch Series 511 Brake. Pin with cotter pin holes and 2 neoprene sleeves 916-120 9/13
13-431 13-Jun
13-4436 Cutler-Hammer Pin 10/8
13-474 Cutler-Hammer Base Pin
13-4762 Cutler-Hammer Push Pin 6/13 96 Pin Minimum
13-482 Cutler-Hammer Base Pin for a 7 Inch Diameter, Type ”S” Series 511 Solenoid Brake, Item # 28, 2 per brake sold each
26-Sep
13-506-9 Cutler-Hammer Pin on a No 505 8 Inch DC Magnetic Brake, Item 10 12/6
13-7638 Cutler-Hammer Pin on a Series 511 Type ”S” 7 Inch Solenoid Brake Assembly. Item # 9, 1 per brake (1LB) 8/11
13-902-7 Cutler-Hammer Pin on a 7 Inch Series 511 Type ”S” Solenoid Brake. Item 7 connects plunger to link. 1 per brake PUB 15475
1346-4 Cutler-Hammer Coil. DC Coil on a 4 Inch Series 511 Solenoid Brake
14-272 Cutler-Hammer Adjusting Stud item 14 on a Bulletin 511 Type ”S” Brake. 1 per brake 8/11
15-292 Cutler-Hammer Washer item 11 on a Bulletin 511 Type ”S” 4 Inch Brake. 1 per brake
15-298 Cutler-Hammer Nut. Lock Nut on a 4 Inch 511 Type S Brake. Item # 18, 1 per brake PUB 9069 (<1LB)
15-300 Cutler-Hammer
15-541 Cutler-Hammer Nut, Adjusting Stud Nut item 9 on a Bulletin 511 Type ”S” 4 Inch Brake. 1 per brake 8/11
15-670 Cutler-Hammer Nut on a No 505 8 Inch DC Magnetic Brake, Item 1
15-680 Cutler-Hammer Locknut for a Bulletin 505 13 Inch DC Brake, item 2 9/13
15-681 Cutler-Hammer Nut. Huglock Nut on a Bulletin 505 16 Inch DC Brake, item 1
15982 Cutler-Hammer
16-1598 Cutler-Hammer Washer,Spherical Washer for a Bulletin 505 13 Inch DC Brake, item 2
16-1598-5 Cutler-Hammer Washer, Spherical Washer on a No 505 23 Inch DC Brake 3/11
16-231 Cutler-Hammer Washer. Insulating Washer on a 4 Inch 511 Type S Brake, Item 12, Pub 9069 PROBABLY OBSOLETE9/13
16-254 Cutler-Hammer Washer, Coil Washer on a Series 511 Type ”S” 7 Inch Solenoid Brake Assembly. Item # 31, 2 per brake (1LB) 50 Min 8/11
16-255 Cutler-Hammer Washer. Coil Washer on a Series 511 4 Inch Brake. 2 per brake 9/13
17-10473-2 17-Jun
17-10474 13-Jun
17-1403 Cutler Hammer Switch. Precision Snap Acting Switch with Normally Open contacts
Approvals UL Listed, CSA Certified
17-156 Cutler-Hammer Block, Pivot Block, OBSOLETE see 17-16951
17-16951 Cutler-Hammer Block, Pivot Block, was 17-156 07/12
17-17199 Solenoid. OBSOLETE Solenoid for 10 Inch Brake
17-473-2 Cutler-Hammer Block, Pivot Block item 12 on a Bulletin 511 Type ”S” 4 Inch Brake. 1 per brake 8/11
17-476 Cutler-Hammer Solenoid Frame for a Bulletin 511 Series ”S” 5 & 1/2 Inch Diameter Brake. Does Not include plunger / armature 9/23
17-488 13-Jun
17-515 Cutler-Hammer Base for a 7 Inch Diameter, Type ”S” Series 511 Solenoid Brake, Item # 29, 1 per brake 7/10
17-516 Cutler-Hammer Block on a 511 Type ”S” 7 Inch Brake Assembly. Publication 15477, 15475 & 10522, 1 per brake. Tie Rod to Outer Shoe Arm 2/12
17-6371-2 Cutler-Hammer Base for a 10 Inch 505 Series Brake 10/9
17-6371-3 Cutler-Hammer Base for a 10 Inch 505 Series Brake
17-6934-2 Cutler-Hammer Base Assembly for 505 Series 13 Inch Brake
17-8050 Cutler-Hammer Base. Brake Base or Frame on a No 505 16 Inch DC Brake, item 25
176371-2 Cutler Hammer Base for a No 505 DC Magnetic Brake
18-615-15 Cutler-Hammer Sleeve. Neoprene Bearing / Sleeve on a 7 Inch Series 511 Type ”S” Solenoid Brake. Item 12. 1 per brake PUB 15475
19-1688-5 Cutler-Hammer Stop Plate by .102 Thick on a Bulletin 505 16 Inch DC Brake, item 22
19-982-19 Cutler-Hammer Retro-Fit Kit on No 505 13 DC Magnetek Brake, Item 19
19-982-20 Cutler Hammer Lock Strip on No 505 13 Inch DC Magnetek Brake, Item 18
19-982-26 Cutler-HammerLock Strip on a 505 8 inch DC Magnetic Brake
19-982-27 Cutler-Hammer Lock-Setup Compression Spring on No 505 8 inch DC Magnetic Brake, Item 18
20-102 Cutler-Hammer Bearing on a 7 Inch Series 511 Type ”S” Solenoid Brake. Item 8 plunger to link. 2 per brake PUB 15475
24-2146-3 Cutler-Hammer Inner Shoe Lever
24-2146-4 Cutler-Hammer Outer Shoe / Lever 115922
24-2674-2 Cutler Hammer
24-3226-12 Cutler-Hammer Shoe Lever, Inner on No 505 13 Inch DC Magnetek Brake, Item 23
24-3288-11 Cutler-Hammer Shoe Lever, Inner Brake Shoe Lever on a No 505 10 Inch DC Brake, Item 22 1/10
24-3289-4 Cutler-Hammer Outer Shoe Lever 10 Inch Series 505 DC Brake, Item 29 4/9
24-3305-4 Cutler-Hammer Shoe Lever Outer on a No 505 23 Inch DC Brake, Item 30, 1 per brake 9/8
24-3320-8 Cutler-Hammer Shoe Lever, Inner / nearest coil on an 8 Inch No 505 DC Brake. Item 22, 1 per brake 105155 12/8
24-3321-4 Cutler Hammer Shoe Lever ( outer) on a No 505 DC Magnetic Brake, Item 30
24-4119 Cutler-Hammer Contact Lever, Item 19 Complete with Items 17, 18, & 36 with Copper Contacts for 914 & 934 Contactors, Publication 13724 & 13726 4/12
24-4130BN Cutler-Hammer Armature Lever for a 914 Single Pole DC Contactor, Item 37, Publication 13724
24-4175 Cutler-Hammer Contact Lever with Connector 4/12
24-4175M Cutler-Hammer Connector Assembly, Lever Contact for a 915 Normally Open Single Pole DC Contactor. Catalog 13729 Item 19. 300 AMPS. AKA S3015455
24-4177 Cutler-Hammer Armature Lever for a 915 DC Contactor, Item 37, Publication 13729 4/12
24-4205 Cutler-Hammer Contact Lever for 936 & 575 Contactors, old # 24-4205-2 4/12
24-4206 Cutler-Hammer Lever. Armature Lever 8/11
24-4206-2 Cutler-Hammer Lever. Armature Lever for a 916 Contactor 4/12
24-4653 Cutler-Hammer Master Switch. Cam Operated Multi Speed Master Switch Bul 14951 Item 15 10/12
24-7534 Cutler-Hammer Lever on a Bull 511 Type ”S” 5 & 1/2 Inch Brake. Item # 14, 2 per brake (<1LB) 8/11
24-7791 Cutler-Hammer Contact Lever Complete, SEE 24-8297 for 913 & 933 Contactors, Publication 13721 & 13723, Old # 24-1914-1 & 24-1321A 4/12
24-8297 Cutler-Hammer Lever, Contact Lever Complete, Old # 24-7791, 24-1914-1 & 24-1321A 3/12
243320-8 Cutler Hammer Shoe Lever (Inner) for a No 505 8 inch DC Magnetic Brake
26-1431 Cutler-Hammer Hydraulic Actuator for a 16 or 19 Inch Diameter Brake Assembly 10/11
26-1432 Cutler-Hammer Actuator. Hydraulic Actuator on a 8 Inch GH506 Hydraulic Brake 6/12
26-1432-2 Cutler-Hammer Actuator. Hydraulic Actuator on a 10 Inch GH506 Hydraulic Brake 6/12
26-1432-3 Cutler-Hammer Actuator. Hydraulic Actuator on a 13 Inch GH506 Hydraulic Brake 6/12
26-1432-9 Cutler-Hammer Hydraulic Actuating Cylinder for a GH509 16 Inch Brake Bull B70-781 4/11
26-791 Cutler-Hammer Hydraulic Cylinder, aka 92314626 for a 16 Inch Bulletin 506 Electro Hydraulic Brake 7/12
29-1829 Cutler-Hammer Bushing for Series 511 Type S Brake (1LB) 8/11
32-467 Cutler Hammer Dacron Felt on a No 505 DC Magnetic Brake, Item 28
32-467-3 Cutler-Hammer DC Brake Part 9/13
32-467-6 Cutler-Hammer Gasket for a 23 Inch Brake, Item # 29, Pub 17228
32-467-8 Cutler-Hammer Felt on No 505 13 Inch DC Magnetek Brake, Item 22 old # 32-467-8 9/13
32-50-10 Cutler-Hammer Felt on No 505 13 Inch DC Magnetek Brake, Item 22 see 32-467-8
32-50-9 Cutler- Hammer Felt, on No.505 8 inch DC Magnetic Brake, Item 21
39-16564 Cutler-Hammer Case on a 7 Inch Solenoid Brake Series 511. Item #1, Bulletin 17377, 1 per brake 7/12
39-507 23-Sep
47-762 Cutler-Hammer Cover. Terminal / Solenoid Cover on a 4 Inch Series 511 Brake 7/12
47-828 Cutler-Hammer Terminal Cover on a Bulletin 511 Type S 4 Inch Brake 7/12
48-103-3 Cutler-Hammer Brake Shoe & Lining for an OLDER STYLE 7 Inch Diameter, Type ”S” Series 511 Solenoid Brake, Item # 25, 2 per brake sold each (3LBS)
48-1199-2 Cutler-Hammer Lining for a series 511 Type ”S” Solenoid Brake 7 Inch Diameter. Non-Asbestos Material, Price Each, 2 Required per brake, No Fasteners (1LB) 7/12
48-1200-3 Cutler-Hammer Brake Shoe & Lining for a 7 Inch Diameter, Type ”S” Series 511 Solenoid Brake, Item # 25, 2 per brake sold each (3LBS) 7/12
48-1267-4 Cutler-Hammer Brake Shoe & Lining. 8 Inch Diameter for a 505 Series DC Brake. Bonded. Sold each, 2 per brake (<3LBS) 5/13
48-1268-4 Cutler-Hammer Brake Shoe & Lining. 10 Inch Diameter for a 505 Series DC Brake. Bonded. Sold each, 2 per brake (<1LB) 7/13
48-1278 Cutler-Hammer Brake Lining Insert. 30 Inch Diameter with a Metal Backing Plate.Bolt Holes. Premium ScanPac Non Asbestos Lining Material (30LBS)
48-1278-3 Cutler-Hammer Lining. 30 Inch Diameter for the 505 Series DC Brake. Sold each, 2 per brake 5/.8
48-1463-3 Cutler-Hammer Brake Shoe with Lining, 10 Inch Diameter, Series 505. Riveted 8/7
48-1604-3 Cutler-Hammer Lining. Brake Lining for a 7 Inch Diameter Type ”S” Series 511 Solenoid Operated Brake. Undrilled, Non-Asbestos Material. Sold each, 1 piece, 2 per brake. Undrilled. Was 48-338-4 3/9 (<1LB)
48-1787 Cutler-Hammer Brake Shoe & Lining 5.5” for a Type ”S” 5 & 1/2 Inch Solenoid Brake Assembly. Qty 1. 2 per brake, item 24 8/11
48-1818 Cutler-Hammer Lining. 8 Inch Diameter for the 505 Series DC Brake. Sold each, 2 per brake (<1LB)
48-1818-2 Cutler-Hammer Lining. 10 Inch Diameter for the 505 Series DC Brake. Sold each, 2 per brake (<1LB)
48-1818-3 Cutler-Hammer Lining. 13 Inch Diameter for the 505 Series DC Brake. Sold each, 2 per brake
48-1818-4 Cutler-Hammer Lining. 16 Inch Diameter for the 505 Series DC Brake. Sold each, 2 per brake
48-1818-5 Cutler-Hammer Lining. 19 Inch Diameter for the 505 Series DC Brake. Sold each, 2 per brake
48-1818-6 Cutler-Hammer Lining. 23 Inch Diameter for the 505 Series DC Brake. Sold each, 2 per brake
48-1971 Cutler-Hammer Brake Shoe Assembly. 19 Inch Brake Shoe Assembly on a No 505 DC Brake. Aluminum Casting with a Bonded Non -Asbestos Lining. Riveted linings are no longer available. Item 34, Publication 17227
48-306 Cutler-Hammer Brake Shoe & Lining for a 4 Inch Type ”S” Bull 511 Brake PUB 19320, Item # 16 2/11
48-306-3 Cutler-Hammer Brake Shoe & Lining for a 4 Inch Type ”S” Bull 511 Brake, PUB 11326 2/11
48-320 Cutler-Hammer Brake Shoe & Lining for an 8 Inch Type M Bull 503 Brake
48-338-22 Cutler-Hammer Lining. Brake Shoe Lining on a 10 Inch No 505 DC Magnetic Brake, Item 30, 2 per brake, sold each
48-338-24 Cutler Hammer Shoe Linning on a No 505 DC Magnetic Brake, Item 30
48-510 Cutler-Hammer Brake Shoe & Lining for a 4 Inch Type ”S” Brake
48-510-3 Cutler-Hammer Brake Shoe & Lining OBSOLETE for a 4 Inch Solenoid Brake Series 511, Bulletin 9069
48-554-7 Cutler-Hammer Brake Shoe & Lining for a 16 Inch Bulletin 505 Brake, 2 per brake, sold each, Bonded Non-Asbestos Material (35LBS) 4/12
48-555-14 Cutler-Hammer Armature. Outer Armature on a 16 Inch Series GH505 Brake Assembly
48-602-5 Cutler-Hammer Armature
48-603-7 Cutler-Hammer Brake Shoe & Lining. 13 Inch Diameter for a 505 Series DC Brake. Bonded. Sold each, 2 per brake 12/12
48-603-8 Cutler-Hammer Brake Shoe & Lining for a 13 Inch Bulletin 505 Brake. Riveted Non-Asbestos Lining, 2 per brake, sold each
48-611-4 Cutler-Hammer Brake Shoe & Lining for a 19 Inch Bulletin 505 Brake, 2 per brake, sold each, Non-Asbestos
48-627-5 Cutler Hammer Inner Armature on a 10 Inch 505 DC Brake. Item 9 4/1
48-627-6 Cutler-Hammer Armature (Outer) on a 505 10 inch DC Magnetic Brake, Item 11
48-633-4 Cutler-Hammer Brake Shoe & Lining for a 23 Inch Bulletin 505 Brake, Item 34, 2 per brake sold each, Non-Asbestos (62LBS) 3/12
48-636-12 Cutler-Hammer
48-641-5 Cutler-Hammer Armature. Inner Armature on a No 505 8 Inch DC Magnetic Brake, Item 9
48-641-6 Cutler-Hammer Armature. Outer Armature on a No 505 8 Inch DC Magnetic Brake, Item 11
48-80 Cutler-Hammer Lining Kit for a Series 551 Type S, 4 Inch Diameter Brake. Material required for 2 brake Shoes. Replaces 48-80-02
48-80-2 Cutler-Hammer Lining Kit 48-80-2 for a Series 551 Type S, 4 Inch Diameter Brake. Material required for 2 brake Shoes
48-830 Cutler-Hammer Brake Shoe & Lining for a No 505 30 Inch DC Brake. 48-830 Item # 33, 2 per brake, sold each (LBS)
48-87-9 Cutler-Hammer OBSOLETE Solenoid Assembly for a 4 Inch Series 511 Type ”S” Brake. Includes items 4,5, 7 & 9 PUB 9069
48-98-3 Cutler-Hammer Brake Shoe & Lining 5.5” for a Type ”S” 5 & 1/2 Inch Solenoid Brake Assembly. Qty. 1, 2 per brake, Item 22, Publication 10824 & 13840
49-1878 Cutler-Hammer Spring Gland on a 7 Inch 75 FT LB Solenoid Brake OBSOLETE SEE 49-3029
49-1978 Cutler-Hammer Gland. Spring Gland on a Bulletin 511 Type ”S” 4 Inch Solenoid Brake. Item 10, 1 per brake 7/10
49-1978- Cutler-Hammer Gland, Spring Gland item 10 on a Bulletin 511 Type ”S” 4 Inch Brake. 1 per brake
49-2036 Cutler-Hammer Gland on a Bulletin 505 16 Inch DC Brake, item 15 10/8
49-2153-2 Cutler-Hammer Gland for a Bulletin 505 13 Inch DC Brake, item 15
49-2194-2 Cutler-Hammer Gland on a 505 10 inch DC Magnetic Brake, item 15
49-2212 Cutler-Hammer Gland on No 505 8 inch DC Magnetic Brake, Item 15
49-3029 Cutler Hammer Spring Gland on a 511 Type ”S” 7 Inch Diameter Solenoid Brake, Parts Bulletin 15475, Item 19, Qty 1 per brake, was 49-1878 11/11
49-5637 Cutler-Hammer Gland. Spring on a Bull 511 Type ”S” 5 & 1/2 Inch Brake. Item # 15, 1 per brake (<1LB) 7/12
49-5719 Cutler-Hammer Spring Assembly 11/09
51-114-2 Cutler-Hammer Link on a 7 Inch Series 511 Type ”S” Solenoid Brake. Item 11. 1 per brake PUB 15475
51-1151 Cutler-Hammer Link. Plunger & Lever Link on a 7 Inch Series 511 Type ”S” Brake, Item 42, 1 per brake
51-2120 Cutler-Hammer Coil Core?, aka 51-979 8/11
51-2220 Cutler-Hammer Link on a 5 & 1/2 Inch Series 511 Type ”S” Solenoid Brake. Link between plunger & Lever Arm. PUB 17377 Item 8
51-82 Cutler-Hammer Plunger / Armature on a 4 Inch 511 Type S Brake. Item 9 & 22, 1 per brake PUB 9069 & 12487 (1LB) 7/12
51-93 Cutler-Hammer Plunger / Armature 7/12
51-93-12 Cutler-Hammer Plunger. Brake Plunger on a Series 511 Type ”S” 5 & 1/2 & 7 Inch Brake. 1 per brake, Item 9, includes items 7 & 8 (3LBS) 7/12
51-93-15 Cutler-Hammer Plunger / Armature Assembly on a 7 Inch Bulletin 511 Type ”S” Solenoid Brake, Item 9, includes items 7 & 8 pin & bearing OBSOLETE SEE 51-93-12
51-93-4 Cutler-Hammer on a Bull 511 Type ”S” 5 & 1/2 Inch Brake. Item # , per brake 4/13
51-97-4 Cutler-Hammer Plunger, Solenoid Armature on a Bulletin 511 Type S 4 Inch Brake 10, 15 not 20 FT LB. Item 1, 1 per brake 7/12
511ED50 Cutler-Hammer Enclosure, OBSOLETE, 511 Series
511H1150-1 Cutler-Hammer Brake Wheel, 4 Inch Diameter, 2 & 3/4 Inch Face width, 1 & 5/8 Inch Offset from C.L., 1 & 5/8 Inch Hub Length, 1/2 Inch Pilot Bore. Maximum Allowable Bore Dia. 1 & 3/8 Inch (5LBS) 7/13
511H1150-2 Cutler-Hammer Brake Wheel, 4 Inch Diameter with a 5/8 Inch Diameter Straight Bore and a 3/16 X 3/32 Keyway (5LBS) 7/12
511H1150-3 Cutler-Hammer Brake Wheel, 4 Inch Diameter with a 3/4 Inch Diameter Straight Bore and a 3/16 X 3/32 Keyway (5LBS) 7/10
511H1150-4 Cutler-Hammer Brake Wheel, 4 Inch Diameter with a 7/8 Inch Diameter Straight Bore and a 3/16 X 3/32 Keyway (5LBS) 7/12
511H1150-5 Cutler-Hammer Brake Wheel, 4 Inch Diameter with a 1.00 Inch Diameter Straight Bore and a 1/4 X 1/8 Inch Keyway (5LBS) 7/12
511H1150-54 Cutler-Hammer Brake Wheel, 4 Inch Diameter with a 1.187 Inch Straight Bore and a 1/4 X 1/8 Inch Keyway (5LBS) 7/12
511H1150-6 Cutler-Hammer Brake Wheel, 4 Inch Diameter with a 1.125 Inch Diameter Straight Bore and a 1/4 X 1/8 Inch Keyway (5LBS) 7/12
511H1150-7 Cutler-Hammer Brake Wheel, 4 Inch Diameter with a 1.25 Inch Diameter Straight Bore and a 1/4 X 1/8 Inch Keyway (5LBS) 7/12
511H1150-8 Cutler-Hammer Brake Wheel, 4 Inch Diameter with a 1.375 Inch Diameter Straight Bore and a 5/16 X 5/32 Inch Keyway (5LBS) 7/12
511H1151 Cutler-Hammer Brake Wheel, 4 Inch Diameter with a Tapered Bore & Keyway
511H1160-1 Cutler-Hammer Brake Wheel, 5 & 1/2 Inch Diameter, 3.25 Inch Face Width , 2 Inch Hub Length, 3.25 Inch Offset, 3.25 Inch Hub Diameter, with a .75 Inch Diameter Pilot Bore, 2 Inch Maximum Bore (7.5LBS) 7/12
511H1160-10 Cutler-Hammer Brake Wheel, 5 & 1/2 Inch Diameter with a 1 & 7/8 Inch Diameter Straight Bore and a 1/2 X 1/4 Inch Keyway 7/12
511H1160-3 Cutler-Hammer Brake Wheel, 5 & 1/2 Inch Diameter with a 3/4 Inch Diameter Straight Bore and a 3/16 X 3/32 Inch Keyway 7/12
511H1160-4 Cutler-Hammer Brake Wheel, 5 & 1/2 Inch Diameter with a 7/8 Inch Diameter Straight Bore and a 3/16 X 3/32 Inch Keyway 7/12
511H1160-5 Cutler-Hammer Brake Wheel, 5 & 1/2 Inch Diameter with a 1 Inch Diameter Straight Bore and a 1/4 X 1/8 Inch Keyway 7/12
511H1160-57 Cutler-Hammer Brake Wheel, 5 & 1/2 Inch Diameter with a 1 & 1/2 Inch Diameter Straight Bore and a 3/8 X 3/16 Inch Keyway 7/12
511H1160-59 Cutler-Hammer Brake Wheel, 5 & 1/2 Inch Diameter with a 1 & 3/4 Inch Diameter Straight Bore and a 3/8 X 3/16 Inch Keyway 7/12
511H1160-6 Cutler-Hammer Brake Wheel, 5 & 1/2 Inch Diameter with a 1.125 Inch Diameter Straight Bore and a 1/4 X 1/8 Inch Keyway 7/12
511H1160-61 Cutler-Hammer Brake Wheel, 5 & 1/2 Inch Diameter with a 2 Inch Diameter Straight Bore and a 1/2 X 1/4 Inch Keyway 7/12
511H1160-7 Cutler-Hammer Brake Wheel, 5 & 1/2 Inch Diameter with a 1 & 1/4 Inch Diameter Straight Bore and a 1/4 X 1/8 Inch Keyway 8/11
511H1160-8 Cutler-Hammer Brake Wheel, 5 & 1/2 Inch Diameter with a 1 & 3/8 Inch Diameter Straight Bore and a 5/16 X 5/32 Inch Keyway 8/11
511H1160-9 Cutler-Hammer Brake Wheel, 5 & 1/2 Inch Diameter with a 1 & 5/8 Inch Diameter Straight Bore and a 3/8 X 3/16 Inch Keyway 8/11
511H1161 Cutler-Hammer Brake Wheel, 5.50 Inch Diameter with a Tapered Bore & Keyway
511H1170-1 Cutler-Hammer Brake Wheel 7 Inch Diameter, Pilot Bore 1/2 Inch. 4.25 Inch face width. 3 Inch hub Length. Symmetrical Style (20LBS) 7/12
511H1170-10 Cutler-Hammer Brake Wheel, 7 Inch Diameter with a 1 & 5/8 Inch Diameter Straight Bore and a 3/8 X 3/16 Inch Keyway 7/12
511H1170-5 Cutler-Hammer Brake Wheel, 7 Inch Diameter with a 1 Inch Diameter Straight Bore and a 1/4 X 1/8th Inch Keyway 8/11
511H1170-57 Cutler-Hammer Brake Wheel, 7 Inch Diameter with a 1 & 1/2 Inch Diameter Straight Bore and a 3/8 X 3/16 Inch Keyway 8/11
511H1170-58 Cutler-Hammer Brake Wheel, 7 Inch Diameter with a 1.687 Inch Diameter Straight Bore and a 3/8 X 3/16 Inch Keyway 8/11
511H1170-59 Cutler-Hammer Brake Wheel, 7 Inch Diameter with a 1 & 3/4 Inch Diameter Straight Bore and a 3/8 X 3/16 Inch Keyway 8/11
511H1170-6 Cutler-Hammer Brake Wheel, 7 Inch Diameter with a 1 & 1/8 Inch Diameter Straight Bore and a 1/4 X 1/8th Inch Keyway 8/11
511H1170-60 Cutler-Hammer Brake Wheel, 7 Inch Diameter with a 1.937 Inch Diameter Straight Bore and a 1/2 X 1/4 Inch Keyway
511H1170-61 Cutler-Hammer Brake Wheel, 7 Inch Diameter with a 2 Inch Diameter Straight Bore and a 1/2 X 1/4 Inch Keyway 8/11
511H1170-62 Cutler-Hammer Brake Wheel, 7 Inch Diameter with a 2 & 1/4 Inch Diameter Straight Bore and a 1/2 X 1/4 Inch Keyway 8/11
511H1170-7 Cutler-Hammer Brake Wheel, 7 Inch Diameter with a 1 & 1/4 Inch Diameter Straight Bore and a 1/4 X 1/8th Inch Keyway 8/11
511H1170-8 Cutler-Hammer Brake Wheel, 7 Inch Diameter with a 1 & 3/8 Inch Diameter Straight Bore and a 5/16 X 5/32 Inch Keyway 7/10
511H1170-9 Cutler-Hammer Brake Wheel, 7 Inch Diameter with a 1 & 5/8 Inch Diameter Straight Bore and a 3/8 X 3/16 Inch Keyway 8/11
511H1171 Cutler-Hammer Brake Wheel, 7 Inch Diameter with a Tapered Bore & Keyway
511H1171-1 Cutler-Hammer Brake Wheel, 7 Inch Diameter with a 3/4 Inch Diameter Tapered Bore and no keyway 8/11
511H1171-12 Cutler-Hammer Brake Wheel, 7 Inch Diameter with a 2 & 3/8 Inch Diameter Tapered Bore and a 5/8 X 5/16 Inch Keyway 8/11
511H1181A-1 Cuter-Hammer Brake Wheel. 8.5 Inch Diameter with a Pilot Bore
511H1190-1 Cutler-Hammer Brake Wheel, 10 Inch Diameter, 4.25 Inch Face Width , 3.25 Inch Hub Length, 2.375 Inch Offset, 4.875 Inch Hub Diameter, with a 1.25 Inch Diameter Pilot Bore, 2.875 Inch Maximum Bore 8/11
511H1191 Cutler-Hammer Brake Wheel, 10 Inch Diameter with a Tapered Bore & Keyway
511H1192-39 Cutler-Hammer Brake Assembly 511 Series. Electrically released spring applied providing ”Fail-Safe” application. 15 FT LB / Intermittent Duty Cycle. 120 Volt AC 60 Hz Coil. A 4 X 2.75 Inch Brake Wheel is not included. Net Weight (16 LB) 7/12
511H1192-40 Cutler-Hammer Brake Assembly 511 Series. Electrically released spring applied providing ”Fail-Safe” application. 15 FT LB / Intermittent Duty Cycle. 240 Volt AC 60 Hz Coil. A 4 X 2.75 Inch Brake Wheel is not included. Net Weight (16 LBS) 8/12
511H1192-41 Cutler-Hammer Brake Assembly 511 Series. Electrically released spring applied providing ”Fail-Safe” application. 15 FT LB / Intermittent Duty Cycle. 480 Volt AC 60 Hz Coil. 9-591-11 A 4 X 2.75 Inch Brake Wheel is not included. Net Weight (16 LBS) 7/12
511H1192-45 Cutler-Hammer Brake Assembly 511 Series. Electrically released spring applied providing ”Fail-Safe” application. 15 FT LB / Intermittent Duty Cycle. 208 Volt AC 60 Hz Coil. A 4 X 2.75 Inch Brake Wheel is not included. Net Weight (16 LBS) 7/12
511H1193-39 Cutler-Hammer Brake Assembly 511 Series. Electrically released spring applied providing ”Fail-Safe” application. 10 FT LB / Intermittent Duty Cycle. 120 Volt AC 60 Hz Coil. 4 Inch Diameter X 2.75 Inch Face Width Brake Wheel is not included. 3 FT LB / Continuous Duty Cycle. A l 4 X 1.25 Inch Face Width Brake Wheel is not included (20LBS) 6/13
511H1193-40 Cutler-Hammer Brake Assembly Series 511 S4 Electrically released spring applied providing ”Fail-Safe” application. 10 Ft LB Continuous, 10 FT LB Intermittent Duty Cycle. 240 Volt AC 60 Hz Coil. 4 Inch Diameter X 2.75 Inch Face Width Brake Wheel is not included (20LBS) 6/13
511H1193-41 Cutler-Hammer Brake Assembly Series 511 S4 Electrically released spring applied providing ”Fail-Safe” application. 10 FT LB / Intermittent Duty Cycle. 480 Volt AC 60 Hz Coil. 4 Inch Diameter X 2.75 Inch Face Width Brake Wheel is not included (16LBS) 6/13
511H1193-45 Cutler-Hammer Brake Assembly 511 Series. Electrically released spring applied providing ”Fail-Safe” application. 3 FT LB Continuous Duty Cycle. 208 Volt AC 60 Hz Coil. 4 Inch Diameter X 2.75 Inch Face Width Brake Wheel is not included. 4 Inch Diameter Brake Wheel is not included (17LBS) 7/12
511H1194-39 Cutler-Hammer Brake Assembly 511 Series. Electrically released spring applied providing ”Fail-Safe” application. 3 FT LB. 120 Volt AC 60 Hz Coil. 4 Inch Diameter X 2.75 Inch Face Width Brake Wheel is not included. The 4 Inch Brake Wheel is not included (20LBS) 6/13
511H1194-40 Cutler-Hammer Brake Assembly Series 511 S4 Electrically released spring applied providing ”Fail-Safe” application. 3 Ft LB Continuous Duty Cycle. 240 Volt AC 60 Hz Coil. 4 Inch Diameter X 2.75 Inch Face Width Brake Wheel is not included (20LBS) 6/13
511H1194-41 Cutler-Hammer Brake Assembly Series 511 S4 Electrically released spring applied providing ”Fail-Safe” application. 3 Ft LB Continuous Duty Cycle. 480 Volt AC 60 Hz Coil. 4 Inch Diameter X 2.75 Inch Face Width Brake Wheel is not included (20LBS) 7/12
511H1195-41 Cutler-Hammer Brake Assembly. 511 Series Type S-7. Electrically released spring applied for ”Fail-Safe” operation. Horizontal frame mount only. 85 Ft LBS Continuous, 480 Volt 60 Hz Coil 7/12
511H1196-41 Cutler-Hammer Brake Assembly. 511 Series Type S-7. Electrically released spring applied for ”Fail-Safe” operation. Horizontal frame mount only. 110 Ft LBS Intermittent, 480 Volt 60 Hz Coil 7/12
511H1197-98 Cutler-Hammer Brake Assembly 511 Series. Electrically released spring applied providing ”Fail-Safe” application. 85 FT LB / Continuous Duty Cycle. 240 Volt DC. 7 Inch Diameter X 4.25 Inch brake wheel is not included (52LBS)
511H1198-98 10/1/2013
511H833D Cutler-Hammer OBSOLETE Brake 7 Inch
511H950A OBSOLETE Cutler-Hammer Solenoid Brake, 4 Inch Diameter 3 FT LBS Intermittent or Continuous Duty. the ”A” does not identify the coil voltage
511H951A Cutler-Hammer Brake Assembly. OBSOLETE 4 Inch 480 Volt see 511H1192-41
511H952-41 See CUT-511H1192-41 Cutler-Hammer Brake Assembly. 511 Series Type ”S”. 4 Inch Diameter, 2.75 face Width.. 480 Volt AC 60 Cycle. PUB 11326 15 LB FT Torque Intermediate Duty. Coil 591-11
511H952A Cutler-Hammer Brake Assembly. 511 Series Type S. 4 Inch Diameter, 2.75 face Width.. 440 Volt AC 60 Cycle. PUB 11326 15 LB FT Torque Intermediate Duty. Coil 591-11
511H955-98 Cutler-Hammer Brake Assembly 511 Series. Electrically released spring applied providing ”Fail-Safe” application. 3 FT LB / Continuous Duty Cycle. 240 Volt DC Coil. A 4 X 2.75 Inch Brake Wheel is not included. Net Weight (16 LBS) 8/11
511H956-97 Cutler-Hammer Brake Assembly 511 Series. Electrically released spring applied providing ”Fail-Safe” application. 10 FT LB / Continuous Duty Cycle. 120 Volt DC Coil. A 4 X 2.75 Inch Brake Wheel is not included. Net Weight (16 LBS)
511H957-97 Cutler-Hammer Brake Assembly 511 Series. Electrically released spring applied providing ”Fail-Safe” application. 15 FT LB / Intermittent Duty Cycle. 120 Volt DC Coil. 9-1346-3 A 4 X 2.75 Inch Brake Wheel is not included. Net Weight (16 LBS)
511H957-98 Cutler-Hammer Brake Assembly 511 Series. Electrically released spring applied providing ”Fail-Safe” application. 15 FT LB / Intermittent Duty Cycle. 240 Volt DC Coil. A 4 X 2.75 Inch Brake Wheel is not included. Net Weight (16 LBS)7/10
511H959A Cutler-Hammer Brake OBSOLETE
511H960-41 Cutler-Hammer Brake Shoe & Lining for a 7 Inch Series 511 Type S Solenoid Brake (4LBS)
511H961A Cutler-Hammer Brake OBSOLETE 5 & 1/2 Inch see 511H992-41
511H970-39 Cutler-Hammer Brake Assembly. Bulletin 511 Type S, 7 Inch Diameter with a 120 Volt 60 Hz Coil, 50 FT LB 7/12
511H970-40 Cutler-Hammer Brake Assembly. Bulletin 511 Type S, 7 Inch Diameter with a 220 Volt 60 Hz Coil, 50 FT LB 7/12
511H970-41 Cutler-Hammer Brake Assembly. Bulletin 511 Type S, 7 Inch Diameter with a 460 Volt 60 Hz Coil, 50 FT LB 7/12
511H970-8 Cutler-Hammer Brake Assembly. Bulletin 511 Type S, 7 Inch Diameter with a 440 Volt 50 Hz Coil 9-585-11, FT LB 7/12
511H971 Cutler-Hammer Brake Assembly. Type ”S” 7 Inch Diameter Magnetic Shoe Brake, Electrically Released / spring Applied for ” fail-safe” operation, Intermittent (one hour max = to 1/2 on 1/2 off ) 75 LB / FT (55LBS) 7/12
511H971-40 Cutler-Hammer Brake Assembly 511 Series. Electrically released spring applied providing ”Fail-Safe” application. 75 FT LB / Intermittent Duty Cycle. 240 Volt 60 Hz. Coil 9-941-15. 7 Inch Diameter X 4.25 Inch brake wheel is not included (52LBS) 7/12
511H971-41 Cutler-Hammer Brake Assembly 511 Series. Electrically released spring applied providing ”Fail-Safe” application. 75 FT LB / Intermittent Duty Cycle. 480 Volt 60 Hz. Coil. 7 Inch Diameter X 4.25 Inch brake wheel is not included (52LBS) 7/12
511H971-8 Cutler-Hammer Brake Assembly 511 Series, 7 Inch Diameter. Electrically released spring applied providing ”Fail-Safe” application. 75 FT LB / Intermittent Duty Cycle. 440 Volt 50 Hz. Coil. A 7 Inch Diameter X 4.25 Inch Face Brake Wheel is not included (52LBS) 7/12
511H975-97 Cutler-Hammer Brake Assembly. Series 511 Type ”S” Solenoid Brake, Electrically released spring applied providing ”Fail-Safe” application. Available in 50, 75, 85 & 110 FT LBS. 120 Volt DC Coil #9-1347. A 7 Inch Diameter X 4.25 Inch brake wheel is not included with the brake. Publication 15477 (52LBS) 7/12
511H975-98 Cutler-Hammer Brake Assembly. Series 511 Type ”S” Solenoid Brake, Electrically released spring applied providing ”Fail-Safe” application. Available in 50, 75, 85 & 110 FT LBS. 120 Volt DC Coil #9-1347. A 7 Inch Diameter X 4.25 Inch brake wheel is not included with the brake. Publication 15477 (52LBS) 7/12
511H976-98 Cutler-Hammer Brake Assembly 511 Series. Electrically released spring applied providing ”Fail-Safe” application. 75 FT LB / Intermittent Duty Cycle. 240 Volt DC. 7 Inch Diameter X 4.25 Inch brake wheel is not included (52LBS) 7/12
511H991-41 Cutler-Hammer Brake. OBSOLETE 10 Inch Solenoid Brake with a 480 Volt Coil, 160 FT LBS Intermittent
511H992-39 Cutler-Hammer Brake Assembly. Series 511, Type ”S” Spring Applied Solenoid Released Brake. 5 & 1/2 Inch Diameter. 35 FT LBS Intermittent / 25 Ft LBS Continuous
39 = 120 Volt 60 Hz
11-Aug
511H992-40 Cutler-Hammer Brake Assembly. Series 511, Type ”S” Spring Applied Solenoid Released Brake. 5 & 1/2 Inch Diameter. 35 FT LBS Intermittent / 25 Ft LBS Continuous
40 = 240 Volt 60 Hz
11-Aug
511H992-41 Cutler-Hammer Brake Assembly. Series 511, Type ”S” Spring Applied Solenoid Released Brake. 5 & 1/2 Inch Diameter. 35 FT LBS Intermittent / 25 Ft LBS Continuous
41 = 480 Volt 60 Hz (29LBS) 8/11
511H992-8 Cutler-Hammer Brake Assembly. Series 511, Type ”S” Spring Applied Solenoid Released Brake. 5 & 1/2 Inch Diameter. 35 FT LBS Intermittent / 25 Ft LBS Continuous
41 = 480 Volt 60 Hz 8/11
511H993-40 Cutler-Hammer Brake Assembly. Series 511 S5 & 1/2 Electrically released spring applied providing ”Fail-Safe” application. 35 FT LB / Intermittent Duty Cycle. 240 Volt AC 60 Hz Coil. 5 & 1/2 Inch Diameter Brake Wheel is not included 8/11
511H993-41 Cutler-Hammer Brake Assembly. Series 511 S 5 & 1/2 Electrically released spring applied providing ”Fail-Safe” application. 35 FT LB / Intermittent Duty Cycle. 480 Volt 60 Hz. Coil. 5 & 1/2 Inch Diameter X 3.35 Inch brake wheel is not included (36LBS) 8/11
511H994-98 Cutler-Hammer Brake Assembly 511 Series. Electrically released spring applied providing ”Fail-Safe” application. 25 FT LB / Intermittent Duty Cycle. 240 Volt DC Coil 8/11
511H995-97 Cutler-Hammer Brake Assembly. Series 511, Type ”S” Spring Applied Solenoid Released Brake. 5 & 1/2 Inch Diameter. 35 FT LBS Intermittent
97 = 120 Volt DC (29LBS) 7/12
511H995-98 Cutler-Hammer Brake Assembly 511 Series. Electrically released spring applied providing ”Fail-Safe” application. 35 FT LB / Intermittent Duty Cycle. 240 Volt DC Coil 7/12
511H996-41 Cutler-Hammer Brake Assembly. OBSOLETE 511 SEE GEMCO CB-160 Series Type S-10. Electrically released spring applied for ”Fail-Safe” operation. Horizontal frame mount only. 160 Ft LBS 480 Volt 60 Hz Coil
511H997-41 Cutler-Hammer Brake Assembly. OBSOLETE SEE GEMCO CB-160 511 Series Type S-10. Electrically released spring applied for ”Fail-Safe” operation. Horizontal frame mount only. 160 Ft LBS 480 Volt 60 Hz Coil
511H997-9 Cutler-Hammer Brake Assembly. OBSOLETE SEE GEMCO CB-160 511 Series Type S-10. Electrically released spring applied for ”Fail-Safe” operation. Horizontal frame mount only. 160 Ft LBS 550 Volt 50 Hz Coil
54-11507-3 Cutler-Hammer Wedge Adjusting Screw Assembly on a 19 Inch Series 505 DC Brake, Item 6 includes item 5 Locknut. 1 per brake, PUB 17227 2/13
54-2652-2 Cutler-Hammer Adjusting Wedge 12/6
54-273 Cutler-Hammer Plunger Guide for a 4 Inch Series 511 Brake, Item 22, Older Brake, PUB 12487 (1LB) 7/12
54-2764 Cutler-Hammer Adjusting Wedge on a 19 Inch Series 505 DC Brake, Item 7, 1 per brake, PUB 17227 2/13
54-2813 Cutler-Hammer Wedge. Brake Wedge 10 Inch Series 505 DC Brake, Item 8
54-2863 Cutler-Hammer Adjusting Wedge on a No 505 8 Inch DC Magnetic Brake, Item 8
54-300 Cutler-Hammer Guides 7/12
54-300-2 Cutler-Hammer Guides. Replaced by 54-300-3 Plunger / Solenoid Guide on a Series 511 Type ”S” 5 & 1/2 & 7 Inch Solenoid Brake Assembly. sold each, 2 per brake, Item 31, Size D Solenoid (1LB) 8/11
54-300-3 Cutler-Hammer Guides. Plunger / Solenoid Guide on a Series 511 Type ”S” 5 & 1/2 & 7 Inch Solenoid Brake Assembly. sold each, 2 per brake, Item 31, Size D Solenoid. Was 54-300-2 (1LB) 7/12
54-300-4 Cutler-Hammer Guides. Plunger / Solenoid Guide on a Series 511 Type ”S” 5 & 1/2 & 7 Inch Solenoid Brake Assembly. sold each, 2 per brake, Item 31, Size D Solenoid (1LB)
54-4020 Cutler-Hammer Wedge Adjustment Assembly on a No 505 8 Inch DC Magnetic Brake, Item 7
54-4020-2 Cutler-Hammer Wedge Adjustment Assembly. Item 7, 1 per brake
54-4040-2 Cutler Hammer Wedge Adjustment Assembly on a 505 10 inch DC Magnetic Brake, Item 7
54-4524 Cutler-Hammer Adjusting Wedge on a No 505 16 Inch DC Brake, Item 8, 2 per brake, sold each
54-6008-33 Cutler-Hammer Cam for Master Controller
55-1037 Cutler-Hammer Clamp. Brake Shoe Clamp on a GH505 8, 10 or 13 Inch Brake. Item 34 (1LB)
55-1039 Cutler-Hammer Clamp on a No 505 23 Inch DC Brake. Item 32, 2 per brake 9/8
55-1079 Cutler-Hammer Clamp. Brake Shoe Clamp on a 19 Inch Series 505 DC Brake, item 32, 4 per brake, PUB 17227
55-1548 Cutler-Hammer Plate on a No 505 23Inch DC Brake, Item 28 9/8
55-1650 Cutler Hammer Retainer on a on a No 505 DC Magnetic Brake, Item 25
551-1037 Cutler Hammer Clamp on a No 505 DC Magnetic Brake, Item 31
56-2561-10 Cutler Hammer Bushing, Neoprene Tube Bushing for a 4 Inch Series 511 Solenoid Brake OBSOLETE SEE 13-3864
56-2561-4 Cutler-Hammer Spacer on a Bull 511 Type ”S” 5 & 1/2 Inch Brake. Item # 10, 2 per brake (<1LB) 8/11
56-3573 Cutler-Hammer Insulator on a 4 Inch 511 Series Type ”S” solenoid Brake. Item 2, 1 per brake, Publication 13864
57-2278-59 Cutler-Hammer Resistor. fixed Ceramic Wire Wound 4000 OHM PT 72 AMP 57 1071 47 3/13
57-955-3 Cutler-Hammer Rectifier. Selenium Rectifier
5982C44A94 Cutler-Hammer Fuse Refill. Standard Speed, 250E Rating 9/12
6-166 Cutler-Hammer Lining Kit. OBSOLETE 2 Brake Linings & Brass Push Pins for a C-H Type ”S” Series 511 4 Inch Solenoid Operated Brake. 4 Holes Drilled and Countersunk for the Push Pins (1LB) 7/10
6-166-2 Cutler Hammer Lining Kit. 2 Brake Linings & Rivets for a C-H Type ”S” Series 511 5 & 1/2 Inch Solenoid Operated Brake 7/12
6-166-3 Cutler-Hammer Lining Kit
6-166-4 Cutler Hammer Lining Kit. 2 Brake Linings & Rivets for a C-H Type ”S” Series 511 10 Inch Solenoid Operated Brake
6-166-5 Cutler Hammer Lining Kit. 2 Brake Linings & Rivets for a C-H Type ”S” Series 511 7 Inch Solenoid Operated Brake 7/12
6-189 Cutler-Hammer Contact Kit 4/12
6011H6A Cutler-Hammer Auxiliary Contact Blocks ( 1NO+1NC ) Pub. 13576 used with 904/905/930 Relays (2LBS)
6011H7 Cutler-Hammer Contact Blocks Pub 13576. 2 N.O. For use with 904, 905 and 906 Relays. For Unit Blocks without permanent magnetic blowout feature.
61-1006 Cutler-Hammer Pull Rod on a 505 10 inch DC Magnetic Brake.
61-1008-3 Cutler-Hammer Pull Rod on a No. 505 23 Inch DC Brake, item 4
61-1013 Cutler-Hammer Pull Rod on a No 505 8 Inch DC Magnetic Brake, Item 5
61-1045 Cutler-Hammer Link on a 511 S 4 Inch Brake Item 12 Pub 9069
61-1275 Cutler-Hammer Contactor Part 5/12
61-1675 Cutler-Hammer Pull Rod on a No 505 10 Inch DC Brake 1/11
61-1677 Cutler-Hammer Pull-Rod on a 505 16 Inch DC Brake
61-912 Cutler-Hammer Pull Rod on a No 505 16 Inch DC Brake. Item 5, 1 per brake 12/11
61-985 Cutler-Hammer Pull Rod on a No 505 13 Inch DC Brake, item 5, 1 per brake
61-994-4 Cutler-Hammer Pull Rod on a 19 Inch Series 505 DC Brake, Item 4 which includes items 2 & 3, 1 per brake, PUB 17227 2/13
623-134 Cutler-Hammer Brake Shoe & Lining for a C-H No. 503 10 Inch Type ”M” Brake (6LBS)
69-1554 Cutler-Hammer Compression Spring on a Bulletin 505 16 Inch DC Brake, item 16
69-1652 Cutler-Hammer Spring, Compression Spring for a Bulletin 505 13 Inch DC Brake, item 16 9/13
69-1664 Cutler-Hammer Spring. Torque Spring on a 19 Inch Series 505 DC Brake, Item 15, 1 per brake, PUB 17227
69-1680 Cutler-Hammer Compression Spring on a 505 10 inch DC Magnetic Brake, Item 16
69-1692 Cutler-Hammer Compression Spring on a No 505 23 Inch DC Brake. Item 15, 1 per brake 9/8
69-1694 Cutler-Hammer Spring, Compression Spring on No 505 8 inch DC Magnetic Brake, Item 16
69-1695 Cutler-Hammer Angle Spring
69-1975 Cutler Hammer Lock Spring on a No 505 DC Magnetic Brake, Item 32
69-1987 Cutler-Hammer Spring. Compression Spring located on the pull rod of a 23 Inch Series GH505 Brake . Item #2. 1 per brake 12/7
69-202 Cutler-Hammer Spring, Main Spring item 13 on a Bulletin 511 Type ”S” Brake. 1 per brake, a recommended spare part 8/11
69-2024 Cutler-Hammer Spherical Washer on a No 505 8 Inch DC Magnetic Brake, Item 3
69-2029 Cutler-Hammer Spring 69-2029 on a Bulletin 505 13 Inch DC Brake, item 3 9/13
69-2145 Cutler-Hammer Spring for a 926 Contactor, Item 25, Publication 13735 4/12
69-2225 Cutler-Hammer Spring, Compression Spring for a Bulletin 505 16 Inch DC Brake, item 3 10/8
69-2226 Cutler-Hammer Spring 3/12
69-253 Cutler-Hammer Spring for Coil on a 4 Inch 511 Type S Brake, Item # 7, 2 per brake PUB 9069 7/12
69-269 Cutler-Hammer Spring. Vertical Shoe to Lever Spring, on a 4 Inch 511 Type S Brake. Item # 11, 1 per brake PUB 9069 (1LB)
69-273 Cutler-Hammer Spring. Coil Spring on a 7 Inch Diameter Series 511 Type ”S” Brake. Item 5 (<1LB)8/11
69-2761 Cutler-Hammer Spring
69-290 Cutler-HammerSpring on a 505 10 inch DC Magnetic Brake, Item 6
69-2910 Cutler-Hammer Solenoid Spring 75 LB T on a 7 Inch Series 511 Type ”S” Solenoid Brake. Item 10. 1 per brake PUB 15475
69-296 Cutler-Hammer Solenoid Spring 50 LB FT on a 7 Inch Series 511 Type ”S” Solenoid Brake. Item 10. 1 per brake PUB 15475 7/12
69-297 Cutler-Hammer Main Spring on a 7 Inch 50 FT LB Solenoid Brake 8/11
69-303 Cutler-Hammer Spring
69-4575 Cutler-Hammer Spring, Solenoid Spring on a Bull 511 Type ”S” 5 & 1/2 Inch Brake. Item # 13, 1 per brake (<1LB) 7/10
69-4908 Cutler-Hammer Spring. Vertical Spring on a Series 511 Type ”S” 4 Inch Brake, Item 8, 1 per brake. Replaces 69-578 & 69-702 Publication 19320 7/12
69-494 Cutler-Hammer Spring. Main Spring
69-578 Cutler-Hammer see 69-4908
69-702 Cutler-Hammer see 69-4908
69-716 spring outer
69-761 Cutler-Hammer Main Spring on a 7 Inch 75 FT LB Solenoid Brake 7/12
73-1017 Cutler-Hammer Rubber Guard on a Type GH505 8 Inch DC Magnetic Shoe Brake. Item #12
73-1017-2 Cutler-Hammer Rubber Guard on a 505 10 inch DC Magnetic Brake, Item 12
73-1017-3 Cutler-Hammer Rubber Guard on a Type GH505 13 Inch DC Magnetic Shoe Brake. Item #12
73-1017-5 Cutler-Hammer Rubber Guard over the Coil on a GH505 19 Inch Brake Assembly. Item 11. Qty. 1, 1 required per brake.
73-1017-6 Cutler-Hammer Rubber Guard on a No 505 23 Inch DC Brake, Item 11, 1 per brake 9/8
7802 Cutler-Hammer Switch. 30 AMP., 600 volt, Motor Controller
7803 Cutler-Hammer Switch. 30 AMP., 600 volt, Motor Controller
7803PS Cutler-Hammer Switch. Snap Action Switch. 30 AMP, 600 Volt
79-15572-3 Cutler-Hammer Bracket, frame to coil on a 16 Inch No 505 DC Brake. Item 20, 2 per brake 112397 12/8
79-15572-4 Cutler-Hammer Bracket, frame to coil on a 19 Inch No 505 DC Brake. Item 18, 2 per brake 99-2059-2 109751 12/8
79-15572-6 Cutler-Hammer Bracket. Angle Bracket on a 10 Inch Series 505 DC Brake, Item 20 4/9
79-415 Cutler-Hammer Bracket on a Bull 511 Type ”S” 5 & 1/2 Inch Brake. Item # 6, 1 per brake (<1LB) 8/11
79-4180-28 Cutler-Hammer Locking Bracket on a No 505 23 Inch DC Brake, Item 27 9/8
79-6783-5 Cutler Hammer Lock Bracket on a No 505 DC Magnetic Brake, Item 26 9/13
8-320 Cutler-Hammer Brake Fluid. / CITGO Brake Fluid, 637-1205 Water-Glycol Type, Qty 4., 1 Gallon Can (40LBS)
88-1332-6 Cutler-Hammer Solenoid Assembly for a Series 511 5.5 Inch Solenoid Brake. Includes, Item 3 Frame 17-476, Item 5 Spring Qty 2 69-273, Item 7 Plunger, Item 8 Link 51-2220, Item 30 Qty 2 Plunger Guides 54-300-3 & Item 31 Washer 16-254
88-1342-11 Cutler-Hammer Solenoid Assembly on a 7 Inch, Bulletin 511 Type ”S” Solenoid Operated Brake. Includes Solenoid, Plunger / Armature, Coil Spring, Coil Washer & Coil Guides. Does not include the electric coil (6LBS) 7/12
88-1553-8 Cutler-Hammer Solenoid Assembly on a 4 Inch, Bulletin 511 Type ”S” Solenoid Operated Brake. Includes Solenoid, Plunger / Armature, Coil Spring, Coil Washer & Coil Guides. Does not include the electric coil
Was old # 88-1584 8/11
88-1584 Cutler-Hammer OBSOLETE see 88-1553-8 Solenoid on a 4 Inch, Bulletin 511 Type ”S” Solenoid Operated Brake. Includes Solenoid, Plunger / Armature, Coil Spring, Coil Washer & Coil Guides. Does not include the electric coil 9/9
88-1584-2 Solinoid With out Coil
88-2930-4 Cutler-Hammer Solenoid Assembly on a 5 & 1/2 Inch, Bulletin 511 Type ”S” Solenoid Brake. Includes, Item 3 Frame 17-476, Item 5 Spring Qty 2 69-273, Item 7 Plunger, Item 8 Link 51-2220, Item 30 Qty 2 Plunger Guides 54-300-2 & Item 31 Washer 16-254 7/12
88-3015-4 Cutler-Hammer Solenoid Assembly for a 4 Inch Series 511 Type ”S” PUB 19320, Item # 28, 1 per brake. Includes items 1 Plunger 51-97-4 , 21 Solenoid Frame 17-488, 23 Coil Washer 16-255, 26 Coil Spring 69-276 & 27 54-300 Plunger Guides 6/13
88-45-5 Cutler-Hammer Solenoid Assembly for a 4 Inch Series 511 Brake. Includes Guides but not the Plunger or Coil 7/13
88-521-5 Cutler-Hammer Coil 240 Volt DC for a 5 & 1/2 Inch Solenoid Brake 8/11
9-1346-3 Cutler-Hammer Coil. 120 Volt DC Brake Coil for a 4 Inch Series 511 Type ”S” Solenoid Brake. New Style 7/12
9-1346-4 Cutler-Hammer Coil. 240 Volt DC Solenoid Brake Coil for a Bulletin 511 Series ”S” 4 Inch Diameter Brake. 3, 10 & 25 FT LB., Coil Suffix -98 (2LBS) 7/12
9-1347-10 Cutler-Hammer Coil. 120 Volt DC Coil for a Series 511 Type ”S” Solenoid Operated Brake. 5 & 1/2 Inch & 7 Inch 8/11
9-1347-11 Cutler-Hammer Coil. 240 Volt DC Coil for a Series 511 Type ”S” Solenoid Operated Brake. 5 & 1/2 Inch & 7 Inch 8/11
9-1641-8 Cutler-Hammer Coil. Coil for a 30 Inch No 505 DC Brake 2/12
9-1688-1 Cutler-Hammer Coil, Contactor Coil (8LBS) 9/12
9-1717-2 Cutler-Hammer
9-179-36 Cutlar-Hammer Coil 4/8
9/18/2029 Cutler-Hammer Coil 1/12 8 to 10 weeks
9-1971-2 Cutler-Hammer Coil
9-580-1 Cutler-Hammer Coil. Solenoid Brake Coil for a Bulletin 511 Series ”S” 4 Inch Diameter Brake. 110 Volts, 60 Hz for a 10370 Solenoid 7/13
9-580-13 Cutler-Hammer Coil. Solenoid Brake Coil for a Bulletin 511 Series ”S” 4 Inch Diameter Brake. 208 Volts, 60 Hz for a 10370 Solenoid 7/13
9-580-2 Cutler-Hammer Coil. Solenoid Brake Coil for a Bulletin 511 Series ”S” 4 Inch Diameter Brake. 220 Volts, 60 Hz for a 10370 Solenoid 7/13
9-580-3 Cutler-Hammer Coil. Solenoid Brake Coil for a Bulletin 511 Series ”S” 4 Inch Diameter Brake. 240 Volts, 60 Hz for a 10370 Solenoid 7/13
9-580-4 Cutler-Hammer Coil. Solenoid Brake Coil for a Bulletin 511 Series ”S” 4 Inch Diameter Brake. 440 Volts, 60 Hz for a 10370 Small / Older Solenoid 7/13
9-580-5 Cutler-Hammer Coil. Solenoid Brake Coil for a Bulletin 511 Series ”S” 4 Inch Diameter Brake. 480 Volts, 60 Hz for a 10370 Solenoid 7/13
9-580-51 Cutler-Hammer Coil. Solenoid Brake Coil for a Bulletin 511 Series ”S” 4 Inch Diameter Brake. 208 / 240 Volts, 60 Hz for a 10370 Solenoid 7/13
9-580-53 Cutler-Hammer Coil. Solenoid Brake Coil for a Bulletin 511 Series ”S” 4 Inch Diameter Brake. 120 Volts, 60 Hz for a 10370 Solenoid 7/13
9-580-6 Cutler-Hammer Coil. Solenoid Brake Coil for a Bulletin 511 Series ”S” 4 Inch Diameter Brake. 550 Volts, 60 Hz for a 10370 Solenoid 7/13
9-585-10 Cutler-Hammer Coil. Solenoid Brake Coil for a Bulletin 511 Series ”S” 5 & 1/2 Inch Diameter Brake. 240/ 60 Hz , 220/50 Hz., Coil Suffix -67, Size ”D” (2LBS) 7/12
9-585-11 Cutler-Hammer Coil. 440 Volt 50Hz Coil for a 7 Inch Series 511 Solenoid Brake 7/12
9-585-12 Cutler-Hammer Coil. OBSOLETE Brake Coil 550 Volt AC 50 Hz for a 511H992A 5.5 Inch Brake Publication 17317, 25 FT LB Continuous Duty
9-585-13 Cutler-Hammer Coil. Solenoid Brake Coil for a Bulletin 511 Series ”S” 5 & 1/2 Inch Diameter Brake. 440 Volts, 60 Hz for a 10370 Solenoid 7/12
9-585-14 Cutler-Hammer Coil. Solenoid Brake Coil for a Bulletin 511 Series ”S” 5 & 1/2 Inch Diameter Brake. 220 Volts, 60 Hz for a 10370 Solenoid, Size ”D”, Mfg code C111025 (2LBS) 7/12
9-585-16 Cutler-Hammer Coil. Solenoid Brake Coil for a Bulletin 511 Series ”S” 5 & 1/2 Inch Diameter Brake. 480 Volts, 60 Hz for a 10370 Solenoid. Coil Suffix -41 (2LBS) 7/13
9-585-17 Cutler-Hammer Coil. Solenoid Brake Coil for a Bulletin 511 Series ”S” 5 & 1/2 Inch Diameter Brake. 208 Volts, 60 Hz for a 10370 Solenoid (2LBS) 7/12
9-585-18 Cutler-Hammer Coil. Solenoid Brake Coil for a Bulletin 511 Series ”S” 5 & 1/2 Inch Diameter Brake. 440 Volts, 60 Hz for a 10370 Solenoid (2LBS) 7/12
9-585-19 Cutler-Hammer Coil. Solenoid Brake Coil for a Bulletin 511 Series ”S” 5 & 1/2 Inch Diameter Brake. 550 Volts, 60 Hz for a 10370 Solenoid (2LBS) 7/12
9-585-2 Cutler-Hammer Coil. Solenoid Brake Coil for a Bulletin 511 Series ”S” 5 & 1/2 Inch Diameter Brake. 240 Volts, 60 Hz for a 10370 Solenoid (2LBS) 2/11
9-585-20 Cutler-Hammer Coil. Solenoid Brake Coil for a Bulletin 511 Series ”S” 5 & 1/2 Inch Diameter Brake. 440 Volts, 60 Hz for a 10370 Solenoid (2LBS) 7/12
9-585-26 Cutler-Hammer Coil. Solenoid Brake Coil for a Bulletin 511 Series ”S” 5 & 1/2 Inch Diameter Brake. 600 Volts, 60 Hz for a 10370 Solenoid (2LBS) 7/12
9-585-33 Cutler-Hammer Coil. Solenoid Brake Coil for a Bulletin 511 Series ”S” 5 & 1/2 Inch Diameter Brake. 208 Volts 60 Hz. Suffix -45 (2LBS) 7/12
9-585-4 Cutler-Hammer Coil. Solenoid Brake Coil for a Bulletin 511 Series ”S” 5 & 1/2 Inch Diameter Brake. 220 Volts, 25 Hz / 480 Volt 60 Hz for a 10370 Solenoid (2LBS) 7/12
9-585-5 Cutler-Hammer Coil 440 Volt, 50 Hz 7/12
9-585-9 Cutler-Hammer Coil. Solenoid Brake Coil for a Bulletin 511 Series ”S” 5 & 1/2 & 7 Inch Diameter Brake. 120 Volts 60 Hz, 110 Volts 50 Hz. Suffix -39, -5 & -66 (2LBS) 7/12
9-591-10 Cutler-Hammer Coil for a 4 Inch, Bulletin 511 Type ”S” Solenoid Operated Brake, 220 Volt (2LBS) 7/12
9-591-11 Cutler-Hammer Coil for a 4 Inch, Bulletin 511 Type ”S” Solenoid Operated Brake, 460/.480 Volt, Coil Suffix -41 (2LBS) 7/12
9-591-12 Cutler-Hammer Coil for a 4 Inch, Bulletin 511 Type ”S” Solenoid Operated Brake, 550 Volt @ 50 Hz (2LBS) 7/12
9-591-5 Cutler-Hammer Coil for a 4 Inch, Bulletin 511 Type ”S” Solenoid Operated Brake, 440 Volt, 60 Hz. (2LBS)
9-591-6 Cutler-Hammer Coil for a 4 Inch, Bulletin 511 Type ”S” Solenoid Operated Brake, 550 Volt 60 Hz (2LBS) 7/12
9-591-9 Cutler-Hammer Coil for a 4 Inch, Bulletin 511 Type ”S” Solenoid Operated Brake, 120 Volt (2LBS) 7/12
9-728-1 Cutler-Hammer Coil. 120 Volt DC Brake Coil for a 4 Inch Series 511 Type ”S” Solenoid Brake. Older Short Style
9-758-20 Cutler Hammer Coil for a S-10, 10 Inch Solenoid Brake. 480 Volt, 160 FT LB 7/12
9-758-30 Cutler-Hammer OBSOLETE Coil for a S-10, 10 Inch Solenoid Brake. 240 Volt, 160 FT LB 7/12
9-758-4 Cutler Hammer Coil for a S-7 10 Inch Solenoid Brake. 480 Volt, 125 FT LB 7/12
9-827-4 Cutler-Hammer Coil. Series Wound Coil for a GH505, 16 Inch DC Brake
9-840-1 Cutler-Hammer Coil. 13 Inch Series 505 30 VDC
9-841-6 Cutler-Hammer Coil. Coil for a Bulletin 505 19 Inch DC Brake
9-847-11 Cutler-Hammer Coil
9-847-2 Cutler-Hammer Coil. Shunt Wound Coil for an 8 Inch Series 505 Brake
9-865-2 Cutler-Hammer Coil. DC Brake Coil for a BUL 505 13 Inch DC Brake, 28.4 Ohms
9-865-5 9-865-5 Cutler-Hammer Coil. 13 Inch Shunt Wound Brake Coil for a BUL 505 DC Brake. 21.4 Volts Res 17.7 Ohms
9-866-2 Cutler-Hammer Coil. NEW PART 9-890-1 Shunt Wound Coil for a GH505DAA2460N,16 Inch Series 505, DC Brake, Suffix 2464 1/10
9-867-1 Cutler-Hammer Coil. 19 Inch Shunt Wound DC Brake Coil 12/11
9-868-1 Cutler-Hammer Coil aka 9-889-5 23 Inch Shunt Wound Brake Coil 90 OHM
9-871-4 Cutler-Hammer Coil. Series Wound Coil on a 10 Inch 505 Brake
9-871-5 Cutler-Hammer Coil. Series Wound Coil for a GH505AAA1205N, 10 Inch DC Brake
9-871-6 Cutler-Hammer Coil. Series Wound Coil on a 10 Inch 505 Brake
9-871-7 Cutler-Hammer Coil. Shunt Wound Coil for a GH505BAA2260N, 10 Inch Series 505, DC Brake, Suffix 2264 (23LBS) 9/13
9-871-8 Cutler-Hammer Coil. 10 Inch Shunt Wound Coil. 4120 turns of 21RD HPT. 102.2 Ohms, Continuous Duty, Drawing A70-3982 (21LBS) 7654-8
9-872-11 Cutler-Hammer Coil. Shunt Wound Coil for an 8 Inch Bulletin 505 DC Brake 110.6 OHM (34LBS) 10 to 20 Days 12/12
9-872-18 Cutler-Hammer Coil. Shunt Wound Coil for a GH505AAA2160N, 8 Inch Series 505, DC Brake, Suffix 2164
9-872-3 Cutler-Hammer Coil. Series Wound Coil for a GH505AAA1107N, 8 Inch DC Brake
9-872-4 Cutler-Hammer Coil. Series Wound Coil for a GH505BAA1204N, 8 Inch DC Brake
9-872-5 Cutler-Hammer Coil. Series Wound Coil for a GH505AAA1109N, 8 Inch DC Brake
9-875-12 Cutler-Hammer Coil. Shunt Wound Coil for a GH505CAA2362N,13 Inch DC Brake
9-875-2 Cutler Hammer Coil. Shunt Wound Coil for a 13 Inch Series 505 Brake Assembly
9-875-7 Cutler Hammer Coil. Shunt Wound Coil for a GH505 13, Inch Series 505, DC Brake, Suffix 2364, Coil OHMS Cold 29.1
9-875-9 Cutler-Hammer Coil. DC Brake Coil for a 13 Inch Series 505 Brake Assembly. Was 9-865-4
9-883-1 Cutler-Hammer Coil. Series Wound Coil for a GH505CAA1303N, 13 Inch DC Brake 7/12
9-883-10 Cutler-Hammer Coil. Series Wound Coil for a GH505CAA1302N, 13 Inch DC Brake 7/12
9-883-2 Cutler-Hammer Coil for a 13 Inch Brake. Series Coil for an 806 Mill Motor 7/12
9-883-3 Cutler-Hammer Coil. Shunt Wound Coil for a 19 Inch 505 Series Brake
9-883-6 Cutler-Hammer Coil. Series Wound Coil for a GH505CAA1305N, 13 Inch DC Brake 7/12
9-883-7 Cutler-Hammer Coil. Series Wound Coil for a GH505CAA1301N, 13 Inch DC Brake 7/12
9-884-1 Cutler-Hammer Coil. Series Wound Coil for a GH505DAA1402N, 16 Inch DC Brake
9-884-5 Cutler-Hammer Coil. Brake Coil, 16 Inch, Series, .006 OHMS (145LBS)
9-884-6 Cutler-Hammer Coil. Series Wound Coil for a GH505CAA1403N, 16 Inch DC Brake
9-885-16 Cutler-Hammer Coil. Series Wound Coil for a GH505EAA1505N, 19 Inch DC Brake
9-885-17 Cutler-Hammer Coil. Series Brake Coil. Suffix 1505
9-885-27 Cutler-Hammer Coil. Series Wound Coil for a GH505EAA1507N, 19 Inch DC Brake
9-885-8 Cutler-Hammer Coil, 19 Inch DC Brake 6/12
9-886-1 Cutler-Hammer Coil. Brake Coil (240LBS)
9-886-4 Cutler-Hammer Coil. Series Wound Coil for a GH505FAA1603N, 23 Inch DC Brake
9-886-5 Cutler-Hammer Coil. Series Wound Coil for a 23 Inch 505 Brake. Brake Suffix 1604
9-886-8 Cutler-Hammer Coil. Series Wound Coil for a GH505FAA1605N,23 Inch DC Brake
9-888-1 Cutler-Hammer Coil. Shunt Wound Coil for a GH5052562N,19 Inch DC Brake
9-888-3 Cutler-Hammer Coil. Shunt Wound Coil for a GH5052560N,19 Inch Series 505, DC Brake, Suffix 2564 8/9
9-889-1 Cutler-Hammer Coil. Shunt Wound Coil for a GH5052660N, 23 Inch Series 505, DC Brake, Suffix 2664
9-889-5 Cutler-Hammer Coil. Shunt Wound Coil for a GH5052662N,23 Inch DC Brake
9-890-1 Cutler-Hammer Coil. Shunt Wound Coil for a GH505DAA2460N,16 Inch Series 505, DC Brake, Suffix 2464 3/13
9-890-2 Cutler-Hammer Coil. Shunt Wound 16 Inch Brake Coil 1/10
9-91-86 Cutler-Hammer
9-941-12 Cutler-Hammer Coil for a 7 Inch, Bulletin 511 Type ”S” Solenoid Operated Brake, 460 Volt, 50 / 75 Ft LB, Coil Suffix -41 7/13
9-941-15 Cutler-Hammer Coil for a 7 Inch 511S, 7 Inch 50 FT LB Brake. 240 Volt AC 7/13
9-941-17 Cutler-Hammer Coil for a 7 Inch Series 511 Type ”S” Solenoid Brake, 50 FT LB & 75 FT LB @ 440 Volt 50 Hz, Size ”D”, Mfg Code C010724, used with Solenoid 88-1342-11 7/13
9-941-19 Cutler-Hammer Coil. 220 Volt 60 Hz Coil for a 7 Inch Solenoid Brake Series 511 7/13
9-941-20 Cutler-Hammer Coil. 120 Volt, 60 Hz Coil for a 7 Inch 511 Series, Solenoid Brake 7/13
9-941-3 Cutler-Hammer Coil for a 7 Inch, Bulletin 511 Type ”S” Solenoid Operated Brake, 440 Volt, 50 Hz, 85 & 110 LB Torque, Coil Suffix -8 7/13
9-941-35 Cutler-Hammer Coil 208 Volts @ 60 Hz for a 7 Inch, 50 & 75 Ft LB Solenoid Brake, Series 511 7/13
9-941-4 Cutler-Hammer Coil for a 7 Inch, Bulletin 511 Type ”S” Solenoid Operated Brake, 240 Volt, 85 / 110 FT LB, Brake Suffix -40, Size ”D”, Mfg.Code (LBS) 7/13
9-941-51 Cutler-Hammer Coil. 120 / 100 Volt for a 7 Inch Solenoid Brake Series 511 7/13
9-941-54 Cutler-Hammer Coil 208 Volts @ 60 Hz for a 7 Inch Solenoid Brake series 511 7/13
9-941-6 Cutler-Hammer Coil for a 7 Inch, Bulletin 511 Type ”S” Solenoid Operated Brake, 460 Volt, 85 / 110 FT LB, Brake Suffix -41, Size ”D”, Mfg.Code C011010 (#LBS) 7/13
9-941-7 Cutler-Hammer Coil for a Series 511 Brake. 220 Volt AC, 50 FT LB 7/13
9-941-8 Cutler-Hammer Coil. 120 Volt, 60 Hz Coil for a 7 Inch 511 Series, Solenoid Brake @ 85 & 110 FT LBS 7/13
9-967-7 Cutler-Hammer Coil. Contactor Coil 5/13
911-5452Z Cutler-Hammer Screw item 4 on a Bulletin 511 Type ”S” 4 Inch Brake. 1 per brake 1/4-20 by 1.5 Inches Long
911-6016Z Cutler-Hammer Hex Cap Screw 1/11
913-868 Cutler-Hammer Pin for a No 503 14 Inch Type ”M” Brake, Item 18 on the Pull Rod
915-1403Z Cutler-Hammer Lock Nut, 1/2 – 13, Item 6 3/9
915-1443Z Cutler-Hammer Locknut
915-1682Z Hex Jam nut
915-24Z Cutler-Hammer Nut, Hex Nut 1/4-20
916-1081Z Cutler-Hammer
916-881Z Cutler-Hammer Washer 5/16 2 per brake
916-882Z Cutler-Hammer Nut, Lock Nut item 11 on a Bulletin 511 Type ”S” 4 Inch Brake. 1 per brake
92314626 Cutler-Hammer Hydraulic Cylinder, aka 26-791 for a 16 Inch Bulletin 506 Brake 12/10
969-482 Cutler-Hammer Spring on a No 505 8 Inch DC Magnetic Brake, Item 6
99-2058 Cutler Hammer Retro-Fit Kit on a 505 13 DC Magnetic Brake, Item 20
99-2058-2 Cutler Hammer Retro Fit Kit on a 10 Inch 505 Series Brake, , includes 2 Angle Brackets 79-15572-6 and the Hardware to mount them 9/13
99-2058-3 Cutler-Hammer Retro-Fit Kit on No 505 13 Inch DC Magnetek Brake, Item 20 9/13
99-20583 Cutler-Hammer Retro-Fit Kit on No 505 13 Inch DC Magnetek Brake, Item 20 9/13
99-2059-2 Cutler-Hammer Retro-Fit Kit on a 19 Inch Series 505 DC Brake, 1 per brake, PUB 17227 2/13
99-673-6 Cutler-Hammer Part
99-673-9 Cutler-Hammer Seal Kit on a No 505 16 Inch DC Brake 1/11
A106-194723 Cutler-Hammer Spring. Torque Spring for a Clark 10 Inch DC Brake Assembly. Item 15 1 per brake. 108833
A106-200480 Cutler-Hammer Spring. Main Spring on a 23 Inch Clark Brake
A50CGA0G Cutler-Hammer Starter, Reversing
B106-194872-6 Clark Brake Coil 13 Inch
B106-194941 Clark Coil B106-194941 16 Inch Series Wound Coil 8/9
C0050E2A Cutler-Hammer Transformer, 50 Volt Open Type AMP continuous without Fuse, Primary 240 / 440 Secondary 110
C80JL421 Cutler-Hammer Contactor. 926 NEMA 6 Contactor, 600 AMPS @ 8 Hours, PUB 12125, old 6002H671 4/12
C80WN121 Cutler-Hammer Coil 12/7
C84AA060 Cutler-Hammer Timer, DC Inline Timer
C84AB005 Cutler-Hammer Timer, DC Inline Timer
CN15DN3AB Cutler-Hammer Contactor, NEMA 1, FVNR, 600 Volt, 3 Ph 6/12
CN15GN3AB Cutler-Hammer Contactor
9-Mar
D26MRD22B1 Cutler-Hammer Relay. Type M Relay. Poles: 2 N.O. – 2 N.C. Coil: 240 VDC
10-Jul
DPCK3250V Cutler-Hammer Contactor, 1000 Volt, 250 AMP 6/11
E49G31BP3 Cutler-Hammer Limit Switch 3/13
E84BAD Cutler-Hammer Limit Switch. Heavy Duty Limit Switch, Hoist Service with Weighted Lever. 600 Volt, NEMA 4
E84BAN Cutler-Hammer Limit Switch. Heavy Duty Limit Switch, Hoist Service with Weighted Lever. 600 Volt, NEMA 4
E84CBE Cutler-Hammer Limit Switch. Heavy Duty Limit Switch, Hoist Service with Weighted Lever. 600 Volt, NEMA 4. Operator Type: Maintained position with weighted lever, cable & reset weight. 2 NC circuits & 1 NO Circuit. Circuits are field reversible to 2 NO & 1 NC 3/12
FD3100L Cutler-Hammer Circuit Breaker with the Line & Load Lugs
G11WS12 Resistor, 0.125 OHM / 183 AMPS 6/12
GH101AA351B15 Cutler-Hammer Switch. Master controller Switch Type F, 5 Speed, 12 Circuit Hoist controller, Bulletin 14951H139 5/13
GH505-A-A-A-2163 Cutler-Hammer Brake Assembly model GH505-A-A-A-2163
GH505 DC Brake
A = 8 Inch Diameter Brake Wheel
A = No other mechanical options
A = No enclosure is to be provided
2163 = Coil # 9-847-2
Without Brake Wheel
GH505-A-A-A-21634N Cutler-Hammer Brake Assembly model GH505-A-A-A-2164N
GH505 DC Brake
A = 8 Inch Diameter Brake Wheel
A = No other mechanical options
A = No enclosure is to be provided
2164 = Coil # 9-8
Without Brake Wheel 10/13
GH505-A-A-A2163-N Cutler Hammer Brake Assembly with a Series Wound Coil 9-872-11
GH505-A-A-A2164-N Cutler-Hammer Brake Assembly. Bull 505, 8 Inch DC Magnetic Brake Assembly, Shunt Coil, Cont Duty, Line 208 VDC, Shunt Coil Volt 29 VDC 8/8
GH505-A-A-C-2164-N Cutler-Hammer Brake Assembly Bull 505, 8 Inch DC Magnetic Brake Assembly, Weather Resistant,Shunt Coil, Cont Duty, Line 208 VDC, Shunt Coil Volt 29 VDC. C-H SO # G419891C, DWG # 88-2565
GH505-A-C-A-2162A04 Cutler Hammer Brake Assembly with Brake Wheel
GH505-A-H-A-1109-N Cutler-Hammer Brake Assembly 8 Inch Magnetic Brake Assembly. Special Low torque version 25 FT LBS. With Series coil for 602 or 802B frame electric motors. Without a brake wheel. 4 weeks to ship.
GH505-B-A-A-1204-N Cutler-Hammer Brake Assembly with a Series Wound Coil 90871-4
GH505-B-A-A-2260N Cutler-Hammer Brake Assembly model GH505-B-A-A-2260N
GH505 DC Brake
B = 10 Inch Diameter Brake Wheel
A = No other mechanical options
A = No enclosure is to be provided
2260 = Shunt Wound Coil # 9-871-7 Intermittent Duty Cycle
N = No Brake Wheel is included 1/10
GH505-B-A-A-2263N Cutler-Hammer Brake Assembly model GH505-B-A-A-2263N
GH505 DC Brake
B = 10 Inch Diameter Brake Wheel
A = No mechanical options
A = No enclosure is to be provided
2263 = Shunt Wound Coil # 9-871-8 for Continuous Duty @ 150 Ft LBS
N = No Brake Wheel is included 223 LBS
GH505-B-N-A-2264-N Cutler-Hammer Brake Assembly GH505 BONA 2264N 10 Inch, High Torque, 208 Volt DC Continuous Duty Cycle.
GH505-C-A-A-1304-C02 Cutler-Hammer Brake Assembly GH505CAA1304C02 Electric DC Brake Assembly. 13 Inch, Series Coil 1304 for an 806 Mill Motor
GH505-C-A-A-2364 Cutler-Hammer Brake Assembly model GH505-C-A-A-2364-N
GH505 DC Brake
C = 13 Inch Diameter Brake Wheel
A = No other mechanical options
A = No enclosure is to be provided
2364 = Coil # 9-875-7
N= No Brake Wheel is to be provided 12/11
GH505-C-A-A-2364-N Cutler-Hammer Brake Assembly. Bull 505, 13 Inch DC Magnetic Brake Assembly, Shunt Coil, Cont Duty, Line 208 VDC, Shunt Coil Volt 30 VDC 1/12
GH505-C-A-C-2364-N Cutler-Hammer Brake Assembly Bull 505, 13 Inch DC Magnetic Brake Assembly, Weather Resistant, Shunt Coil, Cont Duty, Line 208 VDC, Shunt Coil Volt 30 VDC. C-H SO # G419891B, DWG # 88-2565
GH505-C-N-A-1304-N Cutler-Hammer Brake Assembly model GH505-C-N-A-1304-N
GH505 DC Brake
C = 13 Inch Diameter Brake Wheel
M = Modified for Pot Room Brake, no N Designation?
A = No enclosure is to be provided
1304 = Coil # 9-883-2
N = Without a Brake Wheel
GH505-D-A-A-1402-N Cutler-Hammer Brake Assembly model GH505-D-A-A-1402-N
GH505 DC Brake, 1000 FT LBS
D = 16 Inch Diameter Brake Wheel
A = No other mechanical options
A = No enclosure is to be provided
1402 = Wound Coil, Continuos Duty Cycle
N = No Brake Wheel is included
GH505-D-A-A-2463-N Cutler-Hammer Brake Assembly. 16 Inch DC Magnetic Brake Assembly. Shunt Would Coil 9-890-2, 750 Ft LBS Continuous Duty 2/6
GH505-D-A-A-2464N Cutler-Hammer Brake Assembly model GH505-D-A-A-2464N
GH505 DC Brake, 1000 FT LBS, Main Hoist, C4
D = 16 Inch Diameter Brake Wheel
A = No other mechanical options
A = No enclosure is to be provided
2464 = Shunt Wound Coil, Continuos Duty Cycle, 9-890-1
N = No Brake Wheel is included
GH505-D-A-A1402-N Cutler-Hammer No 505 16 Inch DC Magnetic Brake Assembly 3/7
GH505-E-A-A-1508-N GH 505 E-A-A 1508 N DC Brake, 19 Inch with Coil 9-885-8
GH505-ED56 Cutler-Hammer 13 Inch Brake with a Shunt Wound coil for Connection to a C-H Rectifier, same as GH505CNA2364N 8/11
GH505-F-A-A-2664-N Cutler-Hammer 23 Inch DC Brake Assembly
GH505-F-C-A-1605-F08 Cutler-Hammer Brake Assembly model GH505-FCA1605F08
GH505 DC Magnetic Brake, AISE Rated, 4000 FT LBS 1/2 Hour, 2600 FT LBS 1 Hour Duty Cycle
F = 23 Inch Diameter Brake / Brake Wheel
C = Includes a Lever Style Manual Release
A = Open type brake assembly no enclosure is to be provided
1605 = Coil Suffix for a Series Wound Coil # 9-886-8, typically connected to a a 618 or 826 Mill Motor
F08 = Brake Wheel with a pilot bore (1480LBS)
GH505-F-C-A-1605F08 Cutler-Hammer Brake Assembly model GH505-F-C-A-1605F08
GH505 DC Brake, 1000 FT LBS, Main Hoist, C4
F = 23 Inch Diameter Brake Wheel
C =
A = No enclosure is to be provided
1605 = Wound Coil
GH505-NX-E01 Cutler-Hammer Brake Wheel 19 Inch Diameter with a finished bore & keyway
GH505-PX-F08 Brake Wheel 23 Inch Diameter with a Pilot Bore. 12.25 Inch Hub Length with an 11 Inch Offset (400 LBS)
GH505DAA____N Cutler-Hammer Brake Assembly GH505DAA____N Electric DC Brake Assembly. 16 Inch Diameter. No coil information has been provided.
GH505ED64-2 Cutler Hammer Brake, 8 to 10 Weeks 10/13
GH505MXD07 Cutler-Hammer Brake Wheel. 16 Inch Pilot Bore. 7.25 Offset, 8.375 Hub Length
GH515ED17-1 Cutler-Hammer Rectifier Assembly 10/13
GH515ED17-4 Cutler-Hammer Rectifier Panel 10/10
H1040 Cutler-Hammer Heater
9-Mar
ME-220G Cutler-Hammer Contact. Auxiliary Contact for DC Brake. 110 VDC Coil, 2 Pole Type MME Contactor 2/13